Lesson 24 of 46 · Chemistry
Atomic structure and electron configuration
Count protons, neutrons and electrons in any atom or ion, and write ground-state electron configurations, including transition-metal ions.
About 20 minutes
In this lesson
- Find the numbers of protons, neutrons and electrons in an atom or ion from its symbol, mass number and charge.
- Explain isotopes and work out a relative atomic mass from isotopic abundances.
- Write ground-state electron configurations with the Aufbau principle, the Pauli principle and Hund's rule, including ions of transition metals.
The idea
What an atom is made of
An atom has a tiny, dense nucleus of protons and neutrons, surrounded by electrons. Almost all the mass is in the nucleus; almost all the volume is the space the electrons occupy.
| Particle | Relative charge | Relative mass | Where |
|---|---|---|---|
| proton | nucleus | ||
| neutron | nucleus | ||
| electron | about | around the nucleus |
Two numbers describe a nucleus. The atomic number is the number of protons, and it alone decides which element the atom is: every atom with 17 protons is chlorine. The mass number is the number of protons plus neutrons. The symbol carries both, so
A neutral atom has as many electrons as protons. An ion does not: a cation has lost electrons, an anion has gained them. For an ion of charge , the number of electrons is . So () has electrons, and () has . Charge changes the electrons only; protons and neutrons are untouched by ordinary chemistry.
Isotopes and relative atomic mass
Isotopes are atoms of the same element with different numbers of neutrons: same , different . Because chemistry is decided by electrons, isotopes react in the same way; they differ in mass, and some are radioactive.
The relative atomic mass printed in the periodic table is a weighted mean of the masses of the natural isotopes, weighted by how common each is. That is why chlorine is listed as , though no single chlorine atom has that mass: a mass number is a whole number for one nucleus, a relative atomic mass is an average over many atoms.
Shells, subshells and orbitals
Electrons sit in orbitals, regions where an electron is likely to be found. Each orbital holds at most two electrons, and they must have opposite spins (the Pauli exclusion principle: no two electrons in an atom share all four quantum numbers).
- The principal quantum number labels the shell; higher means farther from the nucleus and higher energy.
- Shell contains subshells, labelled by and named s, p, d, f.
- An s subshell has 1 orbital, p has 3, d has 5, f has 7, so they hold 2, 6, 10 and 14 electrons.
- Shell therefore has orbitals and holds at most electrons: 2, 8, 18, 32.
Within a subshell, the magnetic quantum number runs from to (one value per orbital), and the spin quantum number is or .
Filling order: the Aufbau principle and Hund's rule
In the ground state, electrons fill the lowest-energy orbitals first (the Aufbau principle). The order is
A rule that rebuilds it: fill in order of increasing , and when two subshells tie, the one with lower first. That is why () fills before ().
Hund's rule decides how a partly filled subshell is occupied: electrons spread out over the orbitals of equal energy with parallel spins before any pairing starts. Nitrogen () has three unpaired 2p electrons, one in each p orbital; oxygen () has to pair one of them, and has two unpaired electrons.
Long configurations are shortened with the previous noble gas in brackets: sodium is , iron () is .
Configurations and the periodic table
The table is built on these configurations. The period number is the highest shell that is occupied; the s-block (groups 1 and 2), p-block (groups 13 to 18) and d-block (groups 3 to 12) are named after the subshell being filled. For main-group elements the outer-shell (valence) electrons follow from the group: 1 and 2 for groups 1 and 2, the group number minus 10 for groups 13 to 18. Elements in one group share an outer configuration, which is why they react alike.
Ions of transition metals
When a transition metal forms a cation, it loses its 4s electrons first, even though 4s filled first. Once the 3d orbitals are occupied, the 4s electrons are the outermost and the easiest to remove. So iron(II) is and iron(III) is , not .
Two exceptions to know
Chromium is and copper is , not the and the filling order predicts. A half-filled or completely filled d subshell is especially stable, enough to move one electron out of 4s.
Without a calculator
Nothing in the IMAT rules allows a calculator, and these questions do not need one. Particle counts are subtractions; a relative atomic mass is a weighted mean, easiest with the abundances written as fractions such as and .
Worked examples
Example 1: Counting particles in an ion
How many protons, neutrons and electrons are there in ?
The lower number is : 26 protons. This never changes for iron.
Neutrons are .
The charge means three electrons have been lost: electrons.
Check: protons minus electrons is , the charge shown.
Answer
26 protons, 30 neutrons and 23 electrons. Adding 3 electrons instead (29) is the usual slip: a positive charge means electrons were removed.
Example 2: Iron and the iron(II) ion
Write the ground-state configurations of () and , and give the number of unpaired electrons in .
Fill in order: is 18 electrons, the argon core. Then (20) and (26). So .
For the cation, remove the two 4s electrons first: , which has 24 electrons, as requires.
Place six electrons in five d orbitals by Hund's rule: one in each orbital (5), then the sixth pairs up in one of them.
That leaves one pair and four single electrons.
Answer
and , with 4 unpaired electrons. Removing 3d electrons instead gives the wrong .
Example 3: Relative atomic mass of chlorine
Natural chlorine is 75% chlorine-35 and 25% chlorine-37. Taking each isotope's mass as its mass number, find the relative atomic mass of chlorine.
Write the abundances as fractions: and .
Weighted mean: .
. Second route: start from 35 and add of the 2-unit gap to chlorine-37, giving .
Answer
The relative atomic mass is . The plain average of 35 and 37, which is 36, ignores that chlorine-35 is three times as common.
Common traps
Adding electrons to a cation
A positive charge means electrons were lost. has 10 electrons, not 12. Write electrons and substitute the charge with its sign: for , .
Removing 3d electrons before 4s
The order of filling is not the order of removal. A transition-metal atom loses its 4s electrons first, so is and is . Write the neutral atom, then strip 4s.
Mixing up mass number and relative atomic mass
The mass number belongs to one nucleus and is a whole number. The relative atomic mass in the table is an average over isotopes and is usually not a whole number. Never compute neutrons from a table value such as ; use the mass number of the specific isotope.
Forgetting chromium and copper
The filling order predicts for chromium and for copper. Both are wrong: chromium is and copper is . If an option list contains the predicted version, it is there to catch you.
Check yourself
Choose an answer to each question: you will see at once whether it is right, and why.
Question 1: Which species?
Atomic structure
A species has 17 protons, 18 neutrons and 18 electrons. Which is it?
Show the answer
Answer: B.
Working
17 protons means chlorine. The mass number is . Eighteen electrons is one more than the protons, so the charge is : the chloride ion .
Why the other options are wrong
- A. The neutral atom has 17 electrons, one fewer than the species described.
- C. The charge is right, but neutrons, not 18.
- D. A positive ion has lost an electron: 16 electrons. The sign of the charge is reversed.
- E. It has 18 neutrons and 18 electrons, but 18 protons: the proton count fixes the element, and 17 protons means chlorine.
What carries over
Protons fix the element, protons plus neutrons give the mass number, and the electron surplus or deficit gives the charge.
Question 2: Configuration of a transition-metal ion
Electron configuration
What is the ground-state electron configuration of ? (Cobalt has .)
Show the answer
Answer: C.
Working
Neutral cobalt: electrons, . The 2+ ion has 25 electrons, and both removed electrons come from 4s: .
Why the other options are wrong
- A. This removes two 3d electrons and keeps 4s; the 4s electrons are lost first.
- B. This is the neutral cobalt atom, with 27 electrons; nothing has been removed.
- D. The electron count (25) is right, but one electron was taken from 3d; both should come from 4s.
- E. This has 26 electrons, as if only one electron had been removed.
What carries over
For a transition-metal cation, write the neutral atom first, then take electrons from 4s before 3d.
Question 3: How many electrons in a shell?
Atomic structure
What is the maximum number of electrons that can occupy the shell with principal quantum number ?
Show the answer
Answer: D. 18
Working
Shell 3 has the subshells 3s, 3p and 3d, with orbitals. At two electrons per orbital that is 18, which matches .
Why the other options are wrong
- A. Six is the capacity of the 3p subshell alone; the shell also contains 3s and 3d.
- B. Period 3 has 8 elements because 3d fills only after 4s, but the shell itself can hold more.
- C. Nine is the number of orbitals, ; each orbital holds two electrons.
- E. 32 is the capacity of the shell, which includes the 4f subshell.
What carries over
A shell holds electrons; the length of a period is a different number.
Flashcards
Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.
- Atomic number and mass number
- The atomic number is the number of protons and identifies the element. The mass number is protons plus neutrons, so neutrons .
- Isotopes
- Atoms of the same element (same number of protons) with different numbers of neutrons. They react alike but differ in mass.
- Capacity of s, p, d and f subshells
- They have 1, 3, 5 and 7 orbitals, so they hold 2, 6, 10 and 14 electrons. A shell n holds 2n² electrons.
- Hund's rule
- In a subshell of equal-energy orbitals, electrons occupy separate orbitals with parallel spins before any orbital takes a pair.
- Which electrons does a transition metal lose first?
- The 4s electrons, before any 3d electrons: is .
- Chromium and copper configurations
- Chromium is and copper is : a half-filled or full d subshell is especially stable.
Key points
= protons and fixes the element; = neutrons; electrons for an ion of charge .
Isotopes differ only in neutrons; the relative atomic mass is their abundance-weighted mean.
s, p, d and f subshells hold 2, 6, 10 and 14 electrons; shell holds .
Fill by increasing n + l (4s before 3d), spread electrons out before pairing, and remove 4s electrons first when a transition metal forms a cation.
Chromium is and copper is .
All questions here are original and written for UniExamer; none comes from the test maker.
Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.