Lesson 26 of 46 · Chemistry

Chemical bonding and molecular shape

Tell ionic, covalent and metallic bonds apart, predict molecular shapes with VSEPR, and decide whether a molecule is polar.

About 22 minutes

In this lesson

  • Classify a bond as ionic, polar covalent or non-polar covalent from electronegativity, and describe metallic and dative bonding.
  • Predict the shape and approximate bond angle of a small molecule or ion with VSEPR.
  • Decide whether a molecule is polar from its bond polarities and its shape, and count its sigma and pi bonds.

The idea

Why atoms bond

Atoms bond because the bonded arrangement has lower energy than the separate atoms. For main-group elements a useful guide is the octet rule: atoms tend to gain, lose or share electrons until they have eight in their outer shell (two for hydrogen). It is a guide, not a law, as the exceptions below show.

Ionic bonds

When a metal with low ionisation energy meets a non-metal with high electronegativity, electrons are transferred. Sodium gives one electron to chlorine, forming Na+\mathrm{Na^{+}} and Cl−\mathrm{Cl^{-}}, and the ions are held by electrostatic attraction in all directions. The result is a lattice, not molecules: the formula NaCl\mathrm{NaCl} gives the ratio of ions. Ionic solids have high melting points, are often soluble in water, and conduct electricity only when molten or dissolved, when the ions can move.

Covalent bonds

Between non-metals, electrons are shared: a pair of shared electrons is a single bond, two pairs a double bond, three pairs a triple bond. If the two atoms have equal electronegativity, as in Cl2\mathrm{Cl_2}, the pair is shared equally and the bond is non-polar. If not, the pair sits closer to the more electronegative atom, which carries a partial negative charge (δ−\delta^{-}); the bond is polar.

Electronegativity difference gives a rough classification on the Pauling scale: below about 0.4, non-polar covalent; from about 0.4 to about 1.8, polar covalent; above about 1.8, mainly ionic. The boundaries are conventions and textbooks place them a little differently; bonding is a continuum.

A dative (coordinate) bond is a covalent bond in which both shared electrons come from one atom. Ammonia's lone pair bonds to H+\mathrm{H^{+}} to form NH4+\mathrm{NH_4^{+}}. Once formed, a dative bond is identical to the others: the four N–H bonds of the ammonium ion are equivalent.

Metallic bonds

In a metal, the atoms give up their outer electrons to a "sea" of delocalised electrons that move through a lattice of positive ions. This explains why metals conduct electricity and heat, and why they are malleable: the layers can slide without breaking the bonding.

Bond order, length and strength

Bond Shared pairs Sigma (σ) Pi (π)
single 1 1 0
double 2 1 1
triple 3 1 2

The first bond between two atoms is always a sigma bond, formed by head-on overlap of orbitals. Extra bonds are pi bonds, from side-on overlap of p orbitals. Between the same two atoms, a triple bond is shorter and stronger than a double, and a double than a single.

Exceptions to the octet

Boron in BF3\mathrm{BF_3} has only six outer electrons. Central atoms from period 3 onwards, which are larger, can hold more than eight (an expanded octet): phosphorus in PCl5\mathrm{PCl_5} has ten, sulfur in SF6\mathrm{SF_6} has twelve.

VSEPR: predicting shape

Valence-shell electron-pair repulsion (VSEPR) says that the electron domains around a central atom (bonds and lone pairs) repel each other and get as far apart as possible. A double or triple bond counts as one domain.

  1. Count the domains around the central atom: bonded atoms plus lone pairs.
  2. The number of domains gives the electron geometry.
  3. The shape is named from the positions of the atoms only; lone pairs are there but not named.
Domains Lone pairs Shape Angle Example
2 0 linear 180° CO2\mathrm{CO_2}
3 0 trigonal planar 120° BF3\mathrm{BF_3}
3 1 bent a little under 120° SO2\mathrm{SO_2}
4 0 tetrahedral 109.5° CH4\mathrm{CH_4}
4 1 trigonal pyramidal about 107° NH3\mathrm{NH_3}
4 2 bent about 104.5° H2O\mathrm{H_2O}
5 0 trigonal bipyramidal 90° and 120° PCl5\mathrm{PCl_5}
6 0 octahedral 90° SF6\mathrm{SF_6}

Lone pairs repel more strongly than bonding pairs, which is why the angles in ammonia and water are squeezed below 109.5°.

The domain count also gives the hybridisation of the central atom: 2 domains sp, 3 domains sp², 4 domains sp³.

Is the molecule polar?

A molecule is polar if its bond dipoles do not cancel. That needs both polar bonds and a shape that leaves them unbalanced.

  • CO2\mathrm{CO_2} has two polar C=O bonds, but they point in opposite directions on a straight line and cancel: non-polar.
  • H2O\mathrm{H_2O} has two polar O–H bonds at about 104.5°; they add up: polar.
  • CCl4\mathrm{CCl_4} is a symmetrical tetrahedron: non-polar. Replace one chlorine with hydrogen, as in CHCl3\mathrm{CHCl_3}, and the symmetry is broken: polar.

Symmetrical shapes with identical atoms on every position (linear, trigonal planar, tetrahedral, octahedral) give non-polar molecules. Lone pairs on the central atom almost always make the molecule polar.

Worked examples

Example 1: The shape of ammonia

Predict the shape and approximate H–N–H angle of NH3\mathrm{NH_3}, and say whether it is polar.

  1. Nitrogen has 5 outer electrons. Three are used in bonds to hydrogen; the other two form a lone pair.

  2. Domains: 3 bonds + 1 lone pair = 4, so the electron geometry is tetrahedral.

  3. Naming the shape from the atoms only: nitrogen with three hydrogens below it is trigonal pyramidal. The lone pair squeezes the angle from 109.5° to about 107°.

  4. The N–H bonds are polar (nitrogen is more electronegative), and the pyramid is not symmetrical, so the dipoles add.

Answer

Trigonal pyramidal, about 107°, polar. "Trigonal planar" is the tempting wrong answer from counting only the three bonds and forgetting the lone pair.

Example 2: Carbon dioxide against sulfur dioxide

Both CO2\mathrm{CO_2} and SO2\mathrm{SO_2} have a central atom bonded to two oxygen atoms. Explain why one is linear and non-polar and the other bent and polar.

  1. In CO2\mathrm{CO_2}, carbon uses all four outer electrons in two double bonds and has no lone pair: 2 domains, linear, 180°.

  2. The two C=O dipoles are equal and opposite, so they cancel: CO2\mathrm{CO_2} is non-polar.

  3. In SO2\mathrm{SO_2}, sulfur has 6 outer electrons; after bonding to both oxygens it keeps one lone pair. Domains: 2 bonded atoms + 1 lone pair = 3, so the molecule is bent, a little under 120°.

  4. In a bent molecule the two S–O dipoles do not point in opposite directions, so they do not cancel: SO2\mathrm{SO_2} is polar.

Answer

The lone pair on sulfur makes SO2\mathrm{SO_2} bent and polar; carbon in CO2\mathrm{CO_2} has none, so it is linear and non-polar. Judging polarity from the bonds alone would call both polar.

Example 3: Classifying bonds by electronegativity

Using Pauling electronegativities Na 0.9, H 2.2 and Cl 3.2, classify the bonding in NaCl\mathrm{NaCl}, HCl\mathrm{HCl} and Cl2\mathrm{Cl_2}.

  1. NaCl\mathrm{NaCl}: difference 3.2−0.9=2.33.2 - 0.9 = 2.3, above about 1.8: mainly ionic.

  2. HCl\mathrm{HCl}: difference 3.2−2.2=1.03.2 - 2.2 = 1.0: polar covalent, with δ−\delta^{-} on chlorine.

  3. Cl2\mathrm{Cl_2}: difference 00: non-polar covalent.

Answer

Ionic, polar covalent and non-polar covalent. Calling HCl\mathrm{HCl} ionic because it forms ions in water confuses what happens in solution with the bond in the gas molecule.

Common traps

  • Polar bonds, therefore a polar molecule

    CO2\mathrm{CO_2}, BF3\mathrm{BF_3} and CCl4\mathrm{CCl_4} all have polar bonds and are non-polar molecules, because their symmetry cancels the dipoles. Always draw the shape before deciding.

  • Naming the shape after the lone pairs too

    Water has four electron domains, so its electron geometry is tetrahedral, but its shape is bent. Lone pairs set the angles; they are not part of the shape's name.

  • Counting a double bond as two domains

    In VSEPR a double or triple bond is one domain. Counting the two double bonds of CO2\mathrm{CO_2} as four domains would wrongly predict a tetrahedral arrangement.

  • Counting every line as a sigma bond

    A triple bond is one sigma and two pi bonds. In C2H4\mathrm{C_2H_4} there are five sigma bonds (four C–H and one C–C) and one pi bond, not six sigma bonds.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Which molecule is polar?

Molecular polarity

Which of these molecules is polar?

Show the answer

Answer: E. NH3\mathrm{NH_3}

Working

Each of the four other molecules has a symmetrical shape with identical atoms around a central atom that has no lone pair, so its bond dipoles cancel. Ammonia's lone pair makes it trigonal pyramidal; its three polar N–H bonds point the same way and add up to a net dipole.

Why the other options are wrong

  • A. Its C=O bonds are polar, but the molecule is linear and the two dipoles cancel.
  • B. Boron has no lone pair; the trigonal planar shape cancels the three B–F dipoles.
  • C. Four identical C–Cl dipoles at tetrahedral angles cancel exactly.
  • D. The C–H bonds are only slightly polar, and the symmetrical tetrahedron cancels them anyway.

What carries over

A molecule is polar only if its bond dipoles fail to cancel, so check the shape, not just the bonds.

Question 2: The shape of phosphorus trichloride

Molecular shape

What is the shape of a PCl3\mathrm{PCl_3} molecule?

Show the answer

Answer: B. Trigonal pyramidal

Working

Phosphorus has 5 outer electrons: three form bonds to chlorine and two form a lone pair. That gives 4 domains, a tetrahedral arrangement, and with one position taken by the lone pair the atoms form a trigonal pyramid, like ammonia.

Why the other options are wrong

  • A. This counts the three P–Cl bonds and forgets phosphorus's lone pair.
  • C. A T shape needs five domains, two of them lone pairs; phosphorus here has four domains.
  • D. Tetrahedral is the arrangement of the four electron domains; the shape is named from the atoms only.
  • E. A bent molecule has only two atoms bonded to the centre; phosphorus here bonds to three.

What carries over

Count lone pairs to find the arrangement, then name the shape from the atoms alone.

Question 3: Sigma and pi bonds in HCN

Chemical bonding

Hydrogen cyanide has the structure H–C≡N. How many sigma and pi bonds does it contain?

Show the answer

Answer: A. 2 sigma and 2 pi

Working

The H–C single bond is one sigma bond. The C≡N triple bond is one sigma and two pi bonds. In total: 2 sigma and 2 pi.

Why the other options are wrong

  • B. This treats all three shared pairs of the triple bond as pi, leaving only the H–C bond as sigma; a triple bond always contains one sigma bond.
  • C. A triple bond has only one sigma bond; the other two shared pairs are pi bonds.
  • D. This counts every line as a sigma bond.
  • E. This gives the C≡N bond only one pi bond, as a double bond would have.

What carries over

Every bond between two atoms has exactly one sigma bond; any extra shared pairs are pi bonds.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

Dative (coordinate) bond
A covalent bond in which one atom supplies both electrons, as when ammonia's lone pair bonds to H+\mathrm{H^{+}}. Once formed it is identical to other covalent bonds.
VSEPR shape with 4 domains and 1 lone pair
Trigonal pyramidal, with angles of about 107°, as in NH3\mathrm{NH_3}.
VSEPR shape with 4 domains and 2 lone pairs
Bent, with an angle of about 104.5°, as in H2O\mathrm{H_2O}.
Why is CO₂ non-polar?
It is linear, so its two equal, polar C=O bond dipoles point in opposite directions and cancel.
Sigma and pi bonds in a triple bond
One sigma bond (head-on overlap) and two pi bonds (side-on overlap of p orbitals).
Hybridisation from the number of domains
Two domains: sp. Three domains: sp². Four domains: sp³.

Key points

  • Ionic bonds transfer electrons, covalent bonds share them, metallic bonds delocalise them.

  • The electronegativity difference sets bond polarity: roughly below 0.4 non-polar, up to about 1.8 polar covalent, above that mainly ionic.

  • VSEPR: count bonded atoms plus lone pairs, find the arrangement, then name the shape from the atoms only.

  • A molecule is polar only if its bond dipoles do not cancel; lone pairs on the central atom usually make it polar.

  • A single bond is one sigma bond; a double adds one pi bond, a triple adds two.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.