Lesson 13 of 46 · Biology
Enzymes and metabolism
How enzymes lower activation energy, why temperature, pH and substrate change their rate, how inhibitors differ, and how pathways are controlled.
About 22 minutes
In this lesson
- Explain what an enzyme changes in a reaction and what it does not.
- Predict the effect of temperature, pH, substrate concentration and inhibitors on the rate of an enzyme reaction.
- Interpret rate data to tell competitive from non-competitive inhibition, and explain feedback inhibition.
The idea
Metabolism and ATP
Metabolism is the sum of the chemical reactions in a cell. Catabolic reactions break large molecules into smaller ones and release energy (respiration breaks down glucose); anabolic reactions build large molecules and need energy (protein and DNA synthesis). The two are linked by ATP: hydrolysing ATP to ADP and inorganic phosphate releases energy that drives energy-requiring processes, and catabolism regenerates ATP from ADP. A cell holds only a small stock of ATP and recycles it constantly.
What an enzyme does
Enzymes are biological catalysts, almost all of them proteins (a few catalytic RNAs, ribozymes, also exist). Every reaction must pass an energy barrier, the activation energy. An enzyme provides a route with a lower activation energy, so more molecules have enough energy to react and the reaction goes faster at body temperature.
An enzyme does not:
- change the overall energy difference between reactants and products (the free energy change, );
- change the position of equilibrium: it speeds the forward and reverse reactions alike, so equilibrium is simply reached sooner;
- get used up: it is released unchanged and can act again.
Enzyme names usually end in -ase and often name the substrate: lactase hydrolyses lactose, DNA polymerase builds DNA.
The active site
The substrate binds to a small region of the enzyme, the active site, whose shape and chemical groups match it; the result is an enzyme-substrate complex, which turns into enzyme and products:
In the lock-and-key model the active site is a rigid fit; in the more accurate induced-fit model the active site changes shape slightly as the substrate binds, gripping it and straining its bonds. Either way, the fit explains specificity: an enzyme acts on one substrate or one type of bond.
What changes the rate
- Temperature. Raising the temperature increases the kinetic energy of the molecules and so the rate, up to an optimum (about 37 °C for many human enzymes). Above it, the vibrations break the bonds holding the tertiary structure, the active site changes shape and the enzyme is denatured; the rate falls steeply and, typically, does not recover on cooling. At low temperature the enzyme is merely slow: warming it restores activity.
- pH. Each enzyme has an optimum pH. Changes of pH alter the charges on R groups in and around the active site, so substrate binding and the protein's shape suffer, and extreme pH denatures the enzyme. Pepsin, in the stomach, works best at about pH 2; salivary amylase near pH 7; trypsin, in the small intestine, at about pH 8.
- Substrate concentration. At low concentration, more substrate means more collisions and a faster rate. As concentration rises, more active sites are occupied at any moment, until all are busy: the rate levels off at its maximum, (saturation). The substrate concentration that gives half of is the Michaelis constant, ; a low means the enzyme binds its substrate tightly.
- Enzyme concentration. With substrate in excess, the rate is proportional to the amount of enzyme.
Inhibitors
| Competitive | Non-competitive | |
|---|---|---|
| binds to | the active site | another site on the enzyme |
| resembles the substrate? | yes | not necessarily |
| effect of adding much more substrate | overcomes the inhibition | does not overcome it |
| unchanged | lowered | |
| raised | unchanged |
Both types above are usually reversible: the inhibitor comes off again. Irreversible inhibitors bind permanently, often covalently; some nerve poisons work this way.
Cofactors
Many enzymes need a non-protein helper. Cofactors in the narrow sense are inorganic ions such as magnesium, zinc or iron. Coenzymes are organic molecules, often made from vitamins: NAD+ from niacin, FAD from riboflavin, coenzyme A from pantothenic acid. They often carry electrons or groups from one reaction to another. A helper bound tightly and permanently, such as the haem group, is a prosthetic group. The protein alone is the apoenzyme; with its cofactor it is the holoenzyme.
Controlling pathways
Metabolic reactions run in pathways, each step catalysed by its own enzyme. Cells control them in several ways:
- Allosteric regulation: a molecule binding to a site away from the active site changes the enzyme's shape, activating or inhibiting it.
- Feedback inhibition: the end product of a pathway allosterically inhibits the enzyme of an early step, usually the first. When the product accumulates, the pathway slows; when it is used up, the pathway speeds up again. Nothing is wasted making a product the cell already has.
- Inactive precursors: some digestive enzymes are made as inactive forms (pepsinogen, trypsinogen) and activated only where they are needed, so they do not digest the cells that make them.
Worked examples
Example 1: Reading inhibitor data
The rate of an enzyme reaction (in arbitrary units) is measured at four substrate concentrations, with and without a substance X:
| Substrate (mmol/L) | 1 | 2 | 10 | 50 |
|---|---|---|---|---|
| rate without X | 33 | 50 | 83 | 96 |
| rate with X | 14 | 25 | 63 | 89 |
What kind of inhibitor is X?
Compare the two rows at low substrate: X cuts the rate by half or more (33 to 14, 50 to 25). X is an inhibitor.
Compare them at high substrate: the gap shrinks (96 against 89) and the two rows approach the same maximum.
Inhibition that is overcome by more substrate means X competes with the substrate for the active site: is unchanged, and more substrate is needed to reach half of it ( is raised).
Answer
X is a competitive inhibitor. A non-competitive inhibitor would lower the maximum rate, so the "with X" row would level off well below the other however much substrate was added.
Example 2: Heat and cold are not the same
Three samples of the same human enzyme are kept for 30 minutes at 5 °C, 37 °C and 70 °C. All three are then brought to 37 °C and their activity measured. Predict the results.
At 5 °C the enzyme molecules move slowly, but the protein is not damaged. Back at 37 °C it works normally.
The 37 °C sample was always at its optimum: normal activity.
At 70 °C the bonds that maintain the tertiary structure break and the active site loses its shape: the enzyme is denatured. Cooling does not restore the shape.
Answer
The 5 °C and 37 °C samples have similar, normal activity; the 70 °C sample has little or none. The wrong prediction is that cold also denatures the enzyme: low temperature slows it reversibly.
Example 3: Predicting the effect of feedback inhibition
In a pathway A → B → C → D, enzyme 1 converts A to B, enzyme 2 converts B to C and enzyme 3 converts C to D. Product D is an allosteric inhibitor of enzyme 1. A mutation changes enzyme 1 so that D can no longer bind to it, while its active site still works. Predict what happens to the amount of D in the cell.
Normally, as D accumulates it binds enzyme 1 and slows the conversion of A to B, so less D is made.
In the mutant, D cannot bind, so enzyme 1 keeps converting A to B whatever the amount of D.
B and C keep flowing through enzymes 2 and 3, so D keeps being made even when it is not needed.
Answer
D is overproduced and A is used up faster, because the brake on the pathway has gone. Answering that D falls confuses losing the regulatory site with losing the active site.
Common traps
Saying enzymes shift the equilibrium
An enzyme speeds both directions of a reaction equally. It shortens the time to reach equilibrium but does not change where the equilibrium lies, nor the energy released or absorbed by the reaction.
Treating cold like heat
High temperature denatures enzymes, usually for good; low temperature only slows them. An option claiming that cooling to 0 °C destroys an enzyme is wrong.
Confusing the two kinds of inhibitor
The test is "does more substrate overcome it?" Yes means competitive (same , higher ); no means non-competitive (lower ). Remember which quantity each one changes.
Check yourself
Choose an answer to each question: you will see at once whether it is right, and why.
Question 1: What an enzyme changes
Bioenergetics
Which statement about an enzyme-catalysed reaction is correct?
Show the answer
Answer: E. The enzyme lowers the activation energy without changing the overall free energy change of the reaction.
Working
A catalyst offers a lower-energy route between the same reactants and products, so the activation energy falls while , set by the reactants and products, stays the same. It is not consumed, does not move the equilibrium, and optimum pH differs from enzyme to enzyme.
Why the other options are wrong
- A. Enzymes lower the activation energy; raising it would slow the reaction.
- B. An enzyme speeds the forward and reverse reactions alike, so the position of equilibrium does not change.
- C. A catalyst is released unchanged at the end of each cycle and can act again.
- D. Optimum pH varies: pepsin works best near pH 2 and trypsin near pH 8.
What carries over
Enzymes change how fast equilibrium is reached, never where it lies or how much energy the reaction releases.
Question 2: Recognising a competitive inhibitor
Bioenergetics
Which feature is characteristic of a reversible competitive inhibitor?
Show the answer
Answer: B. Its effect can be overcome by raising the substrate concentration.
Working
A competitive inhibitor resembles the substrate and competes for the active site. With much more substrate, the substrate wins most encounters, so the original maximum rate is reached again: unchanged, raised.
Why the other options are wrong
- A. A lowered maximum rate is the mark of non-competitive inhibition.
- C. Permanent binding describes an irreversible inhibitor, and binding away from the active site describes non-competitive or allosteric inhibition.
- D. Denaturation destroys the enzyme's shape; a competitive inhibitor simply occupies the active site for a time.
- E. This is the pattern of non-competitive inhibition; a competitive inhibitor leaves unchanged and raises .
What carries over
If extra substrate cancels the inhibition, the inhibitor is competing for the active site.
Question 3: Where pepsin works fastest
Bioenergetics
Five tubes contain the same amount of egg-white protein and of pepsin, a stomach enzyme. In which tube will the protein be digested fastest?
Show the answer
Answer: D. pH 2, 37 °C
Working
Pepsin works in the stomach, where the pH is about 2, at body temperature. Only the tube with both its optimum pH and 37 °C gives fast digestion; too cold slows it, too hot denatures it, and neutral or alkaline pH is far from its optimum.
Why the other options are wrong
- A. Body temperature is right, but pH 7 is far from pepsin's optimum, which matches the acid stomach.
- B. The pH is right, but at 0 °C molecules move slowly and the reaction is very slow.
- C. An alkaline pH suits intestinal enzymes, not pepsin, which loses activity there.
- E. At 80 °C a human enzyme is denatured, so activity is lost even at the right pH.
What carries over
An enzyme's optimum conditions match where it works in the body.
Flashcards
Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.
- What an enzyme does to activation energy
- It lowers it, by offering a different route; the free energy change and the equilibrium position stay the same.
- Induced fit
- The active site changes shape slightly as the substrate binds, gripping it and straining its bonds.
- Effect of high and low temperature
- Above the optimum the enzyme is denatured and usually stays inactive; at low temperature it is slowed but recovers on warming.
- Competitive vs non-competitive inhibition
- Competitive: binds the active site, overcome by more substrate, unchanged, raised. Non-competitive: binds elsewhere, lowered, unchanged.
- Cofactor, coenzyme, prosthetic group
- A cofactor is a non-protein helper, often an inorganic ion; a coenzyme is an organic one, often from a vitamin (NAD+, FAD); a prosthetic group is bound permanently (haem).
- Feedback inhibition
- The end product of a pathway inhibits an early enzyme, usually allosterically, so the pathway slows when the product accumulates.
Key points
Enzymes lower activation energy; they do not change or the equilibrium, and they are not consumed.
Heat above the optimum denatures enzymes, usually irreversibly; cold only slows them.
Rate rises with substrate concentration until all active sites are busy ().
Competitive inhibition is overcome by more substrate; non-competitive inhibition lowers .
In feedback inhibition, a pathway's end product inhibits an early enzyme.
All questions here are original and written for UniExamer; none comes from the test maker.
Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.