Lesson 37 of 46 · Physics

Forces and Newton's laws

Newton's three laws, free-body diagrams, friction, slopes, lifts and circular motion: how to turn any force problem into F = ma.

About 22 minutes

In this lesson

  • State Newton's three laws and identify third-law pairs correctly.
  • Draw a free-body diagram and apply the net force equation to blocks, slopes, pulleys and lifts.
  • Explain circular motion with a net inward force and use the condition for balanced moments.

The idea

Force and the newton

A force is a push or a pull: a vector, measured in newtons. One newton gives a mass of 1 kg an acceleration of 1 m/s21\ \text{m/s}^2. What decides how a body moves is the net force, the vector sum of all the forces acting on that one body. Start every problem with a free-body diagram: one body, every force on it drawn as an arrow from it, and nothing else.

Newton's three laws

  1. First law (inertia). If the net force on a body is zero, its velocity does not change: it stays at rest, or keeps moving in a straight line at constant speed. Constant velocity needs no net force. A parachutist falling at a steady speed has air resistance exactly equal to weight.
  2. Second law. Fnet=maF_{\text{net}} = ma. The acceleration points in the direction of the net force, and the mass measures how hard the body is to accelerate.
  3. Third law. If body A exerts a force on body B, then B exerts on A a force of the same size, in the opposite direction and of the same kind. The two forces act on different bodies, so they never cancel each other.

Forces you will meet

  • Weight, W=mgW = mg: the Earth's gravitational pull, directed towards the centre of the Earth. A 60 kg person weighs 600 N. On the Moon, where the gravitational field is about a sixth as strong, the same person weighs about 100 N but still has a mass of 60 kg.
  • Normal force, from a surface and perpendicular to it. It is only as large as it needs to be to stop the body moving into the surface. It equals mgmg only for a body on a horizontal surface with no other vertical forces and no vertical acceleration.
  • Tension, in a string or rope, pulling along it. A light string over a frictionless pulley has the same tension all along.
  • Friction, parallel to the surface, opposing sliding. Static friction adjusts itself up to a maximum of μsN\mu_s N; once the body slides, kinetic friction is μkN\mu_k N, usually a little smaller. NN is the normal force and μ\mu the coefficient of friction.
  • Gravitation between any two masses: F=Gm1m2r2F = \frac{Gm_1m_2}{r^2}, with G≈6.7×10−11 N m2/kg2G \approx 6.7 \times 10^{-11}\ \text{N m}^2/\text{kg}^2. Doubling the distance between centres reduces the force to a quarter.

The inclined plane

On a slope at angle θ\theta, resolve the weight along the slope and perpendicular to it:

W∥=mgsin⁡θ,W⊥=mgcos⁡θ.W_{\parallel} = mg\sin\theta, \qquad W_{\perp} = mg\cos\theta.

Perpendicular to the slope nothing accelerates, so the normal force is N=mgcos⁡θN = mg\cos\theta. Along a frictionless slope the net force is mgsin⁡θmg\sin\theta, so a=gsin⁡θa = g\sin\theta whatever the mass: 5 m/s25\ \text{m/s}^2 on a 30∘30^\circ slope. With friction, subtract μkmgcos⁡θ\mu_k mg\cos\theta from the component down the slope.

Apparent weight in a lift

Bathroom scales read the normal force they exert on you. For a person of mass mm in a lift with acceleration aa, taken as positive upwards, Newton's second law gives N−mg=maN - mg = ma, so

N=m(g+a).N = m(g + a).

When the lift accelerates upwards, or slows down while moving down, the scales read more than mgmg. When it accelerates downwards, or slows down while moving up, they read less. In free fall (a=−ga = -g) they read zero, which is what "weightless" means. The direction of the acceleration decides, not the direction of motion.

Circular motion

A body moving in a circle of radius rr at constant speed vv is accelerating, because the direction of its velocity keeps changing. The acceleration points towards the centre and has size a=v2ra = \frac{v^2}{r}. It needs a net inward force

F=mv2r,F = \frac{mv^2}{r},

supplied by real forces: tension in a string, friction on a car's tyres, gravity on a satellite. "Centripetal" names the role these forces play; it is not an extra force to add to the diagram.

Turning effects

The moment (torque) of a force about a pivot is the force multiplied by the perpendicular distance from the pivot to the force's line of action, in N m. A rigid body in equilibrium has zero net force and zero net moment. On a balanced seesaw, F1d1=F2d2F_1 d_1 = F_2 d_2: a 300 N child 2 m from the pivot balances a 600 N adult 1 m from it.

A method for any dynamics problem

  1. Choose the body, or a group of bodies that move together.
  2. Draw every force acting on it.
  3. Choose a positive direction, along the acceleration if you know it.
  4. Write Fnet=maF_{\text{net}} = ma along that direction, and use the perpendicular direction (where the acceleration is zero) to find unknown forces such as the normal force.
  5. Check the units, and ask whether the answer is sensible: a tension between two weights, an acceleration below gg for a body pulled down only by gravity.

Worked examples

Example 1: Pulling a crate across a rough floor

A 5.0 kg crate on a level floor is pulled horizontally with a force of 30 N. The coefficient of kinetic friction is 0.40. Taking g=10 m/s2g = 10\ \text{m/s}^2, find the crate's acceleration and its speed 3.0 s after starting from rest.

  1. Vertically there is no acceleration, so the normal force balances the weight: N=mg=5×10=50 NN = mg = 5 \times 10 = 50\ \text{N}.

  2. Kinetic friction opposes the motion: f=μkN=0.40×50=20 Nf = \mu_k N = 0.40 \times 50 = 20\ \text{N}.

  3. The net horizontal force is 30−20=10 N30 - 20 = 10\ \text{N}, so a=Fnetm=105=2.0 m/s2a = \frac{F_{\text{net}}}{m} = \frac{10}{5} = 2.0\ \text{m/s}^2.

  4. From rest, v=u+at=0+2×3=6.0 m/sv = u + at = 0 + 2 \times 3 = 6.0\ \text{m/s}.

Answer

The crate accelerates at 2.0 m/s22.0\ \text{m/s}^2 and reaches 6.0 m/s after 3.0 s. Forgetting friction gives 305=6 m/s2\frac{30}{5} = 6\ \text{m/s}^2, the tempting wrong answer.

Example 2: Bathroom scales in a lift

A 60 kg person stands on bathroom scales in a lift. Taking g=10 m/s2g = 10\ \text{m/s}^2, what force do the scales exert on the person when the lift (a) accelerates upwards at 2.0 m/s22.0\ \text{m/s}^2, (b) moves upwards at constant speed, (c) moves upwards while slowing down at 2.0 m/s22.0\ \text{m/s}^2?

  1. Two forces act on the person: the weight, 60×10=600 N60 \times 10 = 600\ \text{N} down, and the normal force NN up. Taking up as positive, N−600=60aN - 600 = 60a.

  2. (a) a=+2a = +2: N=600+120=720 NN = 600 + 120 = 720\ \text{N}.

  3. (b) a=0a = 0: N=600 NN = 600\ \text{N}. Constant velocity means zero net force (first law).

  4. (c) Slowing down while moving up means the acceleration points down: a=−2a = -2, so N=600−120=480 NN = 600 - 120 = 480\ \text{N}.

Answer

The scales push with 720 N, 600 N and 480 N. In (c), taking the acceleration as upwards because the lift is moving upwards gives 720 N, the tempting wrong answer.

Example 3: Two masses over a pulley

Masses of 3.0 kg and 2.0 kg hang at the two ends of a light string passing over a frictionless pulley. Taking g=10 m/s2g = 10\ \text{m/s}^2, find their acceleration and the tension in the string.

  1. Treat the two masses as one system moving together. The tension is internal and drops out; the driving force is the difference of the weights, 30−20=10 N30 - 20 = 10\ \text{N}, acting on a total mass of 5.0 kg. So a=105=2.0 m/s2a = \frac{10}{5} = 2.0\ \text{m/s}^2.

  2. The 2.0 kg mass accelerates upwards: T−20=2×2T - 20 = 2 \times 2, so T=24 NT = 24\ \text{N}.

  3. Check with the 3.0 kg mass, which accelerates downwards: 30−T=3×230 - T = 3 \times 2, so T=24 NT = 24\ \text{N} again.

Answer

The masses accelerate at 2.0 m/s22.0\ \text{m/s}^2 and the tension is 24 N. The tension is neither 20 N nor 30 N: it lies between the two weights, as it must if one mass rises and the other falls.

Common traps

  • Pairing the weight with the normal force

    For a book on a table, the weight and the normal force are equal and opposite, but they act on the same body and are different kinds of force: they balance because of the first law. The third-law partner of the Earth's pull on the book is the book's pull on the Earth.

  • Thinking motion needs a net force

    A body moving at constant velocity has zero net force on it. When a question says a body "moves at constant speed in a straight line", write Fnet=0F_{\text{net}} = 0 at once: the driving force equals the resistive forces.

  • Assuming the normal force is always mg

    On a slope N=mgcos⁡θN = mg\cos\theta; in an accelerating lift N=m(g+a)N = m(g + a); and a push at an angle adds or removes a vertical component. Find NN from the forces perpendicular to the surface every time, especially before you compute friction.

  • Adding a centripetal force to the diagram

    The centripetal force is the net inward force of the real forces, not one more force. Draw only tension, weight, friction and normal forces, then set their inward resultant equal to mv2r\frac{mv^2}{r}.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Down a smooth ramp

Dynamics

A 2.0 kg box slides down a frictionless ramp inclined at 30∘30^\circ to the horizontal. Taking g=10 m/s2g = 10\ \text{m/s}^2, what is its acceleration along the ramp?

Show the answer

Answer: B. 5 m/s25\ \text{m/s}^2

Working

The component of the weight along the ramp is mgsin⁡30∘=20×12=10 Nmg\sin 30^\circ = 20 \times \frac{1}{2} = 10\ \text{N}, and nothing opposes it, so a=102=5 m/s2a = \frac{10}{2} = 5\ \text{m/s}^2. Directly: a=gsin⁡θ=10×12=5 m/s2a = g\sin\theta = 10 \times \frac{1}{2} = 5\ \text{m/s}^2.

Why the other options are wrong

  • A. Divides gsin⁡30∘g\sin 30^\circ by the mass as well; the mass has already cancelled out of a=mgsin⁡θma = \frac{mg\sin\theta}{m}.
  • C. Uses gcos⁡30∘g\cos 30^\circ, the component perpendicular to the ramp, which the normal force balances.
  • D. Uses the full free-fall acceleration and ignores the slope.
  • E. This is the weight, mg=20 Nmg = 20\ \text{N}, a force, read as an acceleration.

What carries over

On a frictionless slope the acceleration is gsin⁡θg\sin\theta, whatever the mass.

Question 2: Finding the third-law partner

Dynamics

A book rests on a horizontal table. Which force forms a Newton's third-law pair with the Earth's gravitational pull on the book?

Show the answer

Answer: C. The gravitational pull of the book on the Earth.

Working

A third-law pair consists of two forces of the same kind, equal in size and opposite in direction, each acting on the other body of one interaction. Here the interaction is gravitational, between the Earth and the book, so the partner is the book's gravitational pull on the Earth, which acts on the Earth.

Why the other options are wrong

  • A. It is equal and opposite to the weight, but it acts on the same body and is a contact force; that balance comes from the first law, not the third.
  • B. This is the partner of the table's normal force on the book, a contact force, not of the gravitational pull.
  • D. No friction acts on a book resting on a level table with no sideways push, and friction is not a gravitational force anyway.
  • E. Third-law pairs exist whether or not anything moves: every force is one half of a pair.

What carries over

The two forces of a third-law pair act on different bodies and are of the same kind.

Question 3: Scales in a lift slowing down

Dynamics

A 50 kg person stands on scales in a lift that is moving downwards and slowing down at 2.0 m/s22.0\ \text{m/s}^2. Taking g=10 m/s2g = 10\ \text{m/s}^2, what force do the scales exert on the person?

Show the answer

Answer: E. 600 N

Working

Slowing down while moving down means the acceleration points upwards. Taking up as positive, N−mg=maN - mg = ma, so N=m(g+a)=50×(10+2)=600 NN = m(g + a) = 50 \times (10 + 2) = 600\ \text{N}.

Why the other options are wrong

  • A. Takes the mass in kilograms as a force in newtons; the weight is mg=500 Nmg = 500\ \text{N}.
  • B. This is only mama, the net force; the scales must also support the weight.
  • C. Takes the acceleration as downwards because the lift moves downwards; slowing a downward motion needs an upward acceleration.
  • D. Ignores the acceleration; the scales read the weight only when the velocity is constant.

What carries over

The direction of the acceleration, not the direction of motion, decides whether scales read more or less than the weight.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

Newton's first law
With zero net force, a body stays at rest or keeps moving in a straight line at constant speed.
Newton's second law
Fnet=maF_{\text{net}} = ma: the acceleration is in the direction of the net force and inversely proportional to the mass.
Newton's third law
If A exerts a force on B, B exerts an equal and opposite force of the same kind on A. The two forces act on different bodies.
Static and kinetic friction
Static friction adjusts itself up to μsN\mu_s N; sliding friction is μkN\mu_k N, where NN is the normal force.
Acceleration down a frictionless slope
a=gsin⁡θa = g\sin\theta, independent of the mass; the normal force is mgcos⁡θmg\cos\theta.
Scale reading in an accelerating lift
N=m(g+a)N = m(g + a) with aa positive upwards: more than mgmg when the acceleration is upwards, less when it is downwards, zero in free fall.

Key points

  • Newton's second law uses the net force: Fnet=maF_{\text{net}} = ma, with the acceleration along the net force.

  • Zero net force means constant velocity, not necessarily rest.

  • The forces of a third-law pair act on different bodies and are of the same kind.

  • On a slope the weight splits into mgsin⁡θmg\sin\theta along it and mgcos⁡θmg\cos\theta into it.

  • Circular motion needs a net inward force of mv2r\frac{mv^2}{r}, supplied by real forces.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.