Lesson 38 of 46 · Physics
Work, energy and momentum
Work, kinetic and potential energy, power and momentum: when energy is conserved, when momentum is, and how to use each to solve problems fast.
About 22 minutes
In this lesson
- Calculate work, kinetic and potential energy and power, and use the work–energy theorem.
- Use conservation of mechanical energy, and account for the energy lost to friction.
- Apply impulse and conservation of momentum to collisions and explosions, and tell elastic from inelastic collisions.
The idea
Work: force times displacement
A force does work when its point of application moves in the direction of the force:
where is the angle between the force and the displacement. Work is a scalar, measured in joules (). Three cases matter:
- force along the motion (): , positive;
- force against the motion (), like friction: , negative;
- force perpendicular to the motion (): . The normal force on a car on a level road, and the tension in a string whirling a ball round a circle, do no work.
On a graph of force against displacement, the work is the area under the line.
Kinetic and potential energy
Kinetic energy is . It grows with the square of the speed: double the speed and the kinetic energy is four times as large.
Gravitational potential energy near the Earth's surface is , measured from any level you choose; only its changes matter.
A spring obeys Hooke's law, , where is the extension and the spring constant in N/m. Stretched by , it stores elastic potential energy , the area under its force–extension line.
The work–energy theorem and conservation of energy
The net work done on a body equals its change in kinetic energy:
When only gravity (and springs) do work, mechanical energy is conserved: stays constant. A body falling from rest through a height reaches , the same result as from kinematics, and the same whatever path it follows down a frictionless slope. With friction, mechanical energy is not conserved: the missing energy has become internal energy, felt as heat. Total energy is always conserved; it only changes form.
Power and efficiency
Power is the rate of doing work or of transferring energy: , in watts (). A force moving its point of application at constant velocity along its own direction delivers . A kilowatt-hour is an energy: .
Efficiency is useful energy output divided by total energy input. For any real machine it is less than 1, or 100%.
Momentum and impulse
Momentum is , a vector measured in kg m/s. In its general form, Newton's second law says that the net force equals the rate of change of momentum, so
The product is the impulse. For a given change of momentum, a longer stopping time means a smaller force: airbags, crumple zones and bending your knees when you land all work this way.
Conservation of momentum
If no external force acts on a system, or the external forces cancel, its total momentum stays constant. In a collision or an explosion the internal forces are third-law pairs: equal and opposite, acting for the same time. The momentum one body gains, the other loses. Momentum is a vector, so give velocities in one direction a plus sign and in the other a minus sign.
Elastic and inelastic collisions
Momentum is conserved in every collision; kinetic energy is not.
| Collision | Momentum | Kinetic energy |
|---|---|---|
| Elastic | conserved | conserved |
| Inelastic | conserved | partly turned into heat, sound and deformation |
| Perfectly inelastic (the bodies stick) | conserved | the largest possible loss |
In an explosion from rest the total momentum stays zero, while kinetic energy appears from chemical or elastic energy.
Choosing the tool
If a question gives forces and distances but no times, use energy. If it gives forces and times, or describes a collision, use momentum. When bodies stick together, momentum gives the common speed; then compare the kinetic energies before and after to find what was lost.
Worked examples
Example 1: Energy on a playground slide
A 30 kg child slides from rest down a slide whose top is 5.0 m above its bottom. Taking : (a) how fast would the child be moving at the bottom without friction? (b) In fact the child reaches the bottom at 8.0 m/s. How much energy became heat?
Without friction, , so and . The mass cancels, and the shape of the slide does not matter.
Potential energy at the top: .
Kinetic energy actually reached: .
The difference was done as work against friction: .
Answer
Without friction the child would reach 10 m/s; in fact 540 J became heat. Dropping the 2 from gives , which is slower than the real speed with friction: a sure sign of a slip.
Example 2: Two trolleys that couple together
A 2.0 kg trolley moving at 6.0 m/s runs into a stationary 1.0 kg trolley, and they couple together. Find their speed just afterwards and the kinetic energy lost.
Momentum before: .
Momentum after is the same: , so .
Kinetic energy before: . After: .
Loss: , a third of the original, turned into heat, sound and deformation.
Answer
The coupled trolleys move at 4.0 m/s, and 12 J of kinetic energy is lost. Using conservation of kinetic energy instead, , gives : wrong, because a collision in which the bodies stick is inelastic.
Example 3: The power of a hoist
An electric hoist lifts a 50 kg load through 12 m at constant speed in 10 s. Taking , find its useful power output. If it draws 800 W of electrical power, what is its efficiency?
At constant speed the lifting force equals the weight: .
Work done on the load: , so .
Check by a second route: the speed is , and .
Efficiency: , or 75%.
Answer
The useful power is 600 W and the efficiency is 75%. Using the mass instead of the weight gives 60 W, ten times too small.
Common traps
Treating kinetic energy as proportional to speed
Kinetic energy goes with . Doubling a car's speed quadruples its kinetic energy, so at the same braking force it needs four times the stopping distance, not twice.
Conserving kinetic energy in a collision where bodies stick
Only momentum is guaranteed to be conserved in a collision. When bodies stick together, the collision is perfectly inelastic: find the speed from momentum, never from kinetic energy.
Ignoring the signs of momentum
A 2 kg ball at +3 m/s and a 1 kg ball at −6 m/s have a total momentum of , not 12 kg m/s. Choose a positive direction and give every velocity its sign before you add.
Counting work for a perpendicular force
Carrying a bag across a level floor at constant velocity, your upward force on the bag does no work on it, because the bag moves at right angles to that force. Work needs a component of the force along the displacement.
Check yourself
Choose an answer to each question: you will see at once whether it is right, and why.
Question 1: Speed after a fall
Energy
A 0.50 kg ball is dropped from rest from a height of 20 m. Ignoring air resistance and taking , with what speed does it reach the ground?
Show the answer
Answer: B.
Working
Energy is conserved: , so . Second route: the fall takes , and .
Why the other options are wrong
- A. Comes from , which drops the factor 2 in .
- C. Keeps the mass on one side only, writing ; the mass multiplies both energies and cancels.
- D. Writes , whose units are , not those of a speed.
- E. This is , with the square root forgotten.
What carries over
In energy conservation for a fall, the mass cancels: the speed depends only on the height.
Question 2: Two skaters push apart
Momentum
Two skaters, of 60 kg and 40 kg, stand at rest on smooth ice. They push each other apart, and the 40 kg skater moves off at 3.0 m/s. What is the velocity of the 60 kg skater?
Show the answer
Answer: C. 2.0 m/s in the opposite direction to the 40 kg skater
Working
The total momentum is zero before and after. The 40 kg skater has , so the 60 kg skater has 120 kg m/s the other way: , opposite. Second route: the two forces are equal and act for the same time, so the accelerations are in the ratio , and the speeds in the ratio .
Why the other options are wrong
- A. Assumes the skater who pushes stays still; the push acts on both, and the total momentum must stay zero.
- B. The size is right but not the direction: equal and opposite momenta need opposite velocities.
- D. Makes the speeds equal instead of the momenta; the forces are equal, but the heavier skater gains less speed.
- E. Inverts the mass ratio, ; the heavier skater must move more slowly, not faster.
What carries over
Parts of a system that starts at rest move off with equal and opposite momenta, so each speed is inversely proportional to its mass.
Question 3: Braking from twice the speed
Energy
A car braking with a constant force stops in 40 m from a speed of 20 m/s. With the same braking force, what distance does it need to stop from 40 m/s?
Show the answer
Answer: C. 160 m
Working
The brakes do work , so with fixed, is proportional to . Doubling the speed multiplies the distance by 4: . Second route: the deceleration is fixed, and gives the same proportionality.
Why the other options are wrong
- A. Assumes the distance depends only on the force; the work the brakes must do equals the kinetic energy, which depends on the speed.
- B. Scales the distance in proportion to the speed; kinetic energy goes with the square of the speed.
- D. Scales the distance with the cube of the speed, a factor of 8; the work–energy theorem gives the square.
- E. Uses a factor of 16, squaring the correct factor of 4 a second time.
What carries over
At a fixed braking force, the stopping distance grows with the square of the speed.
Flashcards
Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.
- Work done by a force
- , in joules; it is zero when the force is perpendicular to the displacement.
- Kinetic and gravitational potential energy
- and . Doubling the speed quadruples the kinetic energy.
- Speed after falling through a height h
- , whatever the mass and, without friction, whatever the path.
- Power
- Work or energy per unit time, , in watts; at constant velocity, .
- Impulse
- : the same change of momentum over a longer time needs a smaller force.
- Elastic versus inelastic collisions
- Momentum is conserved in both. Kinetic energy is conserved only in an elastic collision, and the loss is largest when the bodies stick together.
Key points
Work is , and it is zero for a force perpendicular to the motion.
The net work done on a body equals its change in kinetic energy.
Without friction, kinetic plus potential energy stays constant; with friction, the loss becomes heat.
Momentum is conserved in every collision; kinetic energy only in elastic ones.
Power is , or at constant velocity.
All questions here are original and written for UniExamer; none comes from the test maker.
Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.