Lesson 38 of 46 · Physics

Work, energy and momentum

Work, kinetic and potential energy, power and momentum: when energy is conserved, when momentum is, and how to use each to solve problems fast.

About 22 minutes

In this lesson

  • Calculate work, kinetic and potential energy and power, and use the work–energy theorem.
  • Use conservation of mechanical energy, and account for the energy lost to friction.
  • Apply impulse and conservation of momentum to collisions and explosions, and tell elastic from inelastic collisions.

The idea

Work: force times displacement

A force does work when its point of application moves in the direction of the force:

W=Fscos⁡θW = Fs\cos\theta

where θ\theta is the angle between the force and the displacement. Work is a scalar, measured in joules (1 J=1 N m1\ \text{J} = 1\ \text{N m}). Three cases matter:

  • force along the motion (θ=0∘\theta = 0^\circ): W=FsW = Fs, positive;
  • force against the motion (θ=180∘\theta = 180^\circ), like friction: W=−FsW = -Fs, negative;
  • force perpendicular to the motion (θ=90∘\theta = 90^\circ): W=0W = 0. The normal force on a car on a level road, and the tension in a string whirling a ball round a circle, do no work.

On a graph of force against displacement, the work is the area under the line.

Kinetic and potential energy

Kinetic energy is Ek=12mv2E_k = \frac{1}{2}mv^2. It grows with the square of the speed: double the speed and the kinetic energy is four times as large.

Gravitational potential energy near the Earth's surface is Ep=mghE_p = mgh, measured from any level you choose; only its changes matter.

A spring obeys Hooke's law, F=kxF = kx, where xx is the extension and kk the spring constant in N/m. Stretched by xx, it stores elastic potential energy 12kx2\frac{1}{2}kx^2, the area under its force–extension line.

The work–energy theorem and conservation of energy

The net work done on a body equals its change in kinetic energy:

Wnet=ΔEk.W_{\text{net}} = \Delta E_k.

When only gravity (and springs) do work, mechanical energy is conserved: Ek+EpE_k + E_p stays constant. A body falling from rest through a height hh reaches v=2ghv = \sqrt{2gh}, the same result as v2=2ghv^2 = 2gh from kinematics, and the same whatever path it follows down a frictionless slope. With friction, mechanical energy is not conserved: the missing energy has become internal energy, felt as heat. Total energy is always conserved; it only changes form.

Power and efficiency

Power is the rate of doing work or of transferring energy: P=WtP = \frac{W}{t}, in watts (1 W=1 J/s1\ \text{W} = 1\ \text{J/s}). A force moving its point of application at constant velocity vv along its own direction delivers P=FvP = Fv. A kilowatt-hour is an energy: 1000 W×3600 s=3.6×106 J1000\ \text{W} \times 3600\ \text{s} = 3.6 \times 10^6\ \text{J}.

Efficiency is useful energy output divided by total energy input. For any real machine it is less than 1, or 100%.

Momentum and impulse

Momentum is p=mvp = mv, a vector measured in kg m/s. In its general form, Newton's second law says that the net force equals the rate of change of momentum, so

F Δt=Δp.F\,\Delta t = \Delta p.

The product F ΔtF\,\Delta t is the impulse. For a given change of momentum, a longer stopping time means a smaller force: airbags, crumple zones and bending your knees when you land all work this way.

Conservation of momentum

If no external force acts on a system, or the external forces cancel, its total momentum stays constant. In a collision or an explosion the internal forces are third-law pairs: equal and opposite, acting for the same time. The momentum one body gains, the other loses. Momentum is a vector, so give velocities in one direction a plus sign and in the other a minus sign.

Elastic and inelastic collisions

Momentum is conserved in every collision; kinetic energy is not.

Collision Momentum Kinetic energy
Elastic conserved conserved
Inelastic conserved partly turned into heat, sound and deformation
Perfectly inelastic (the bodies stick) conserved the largest possible loss

In an explosion from rest the total momentum stays zero, while kinetic energy appears from chemical or elastic energy.

Choosing the tool

If a question gives forces and distances but no times, use energy. If it gives forces and times, or describes a collision, use momentum. When bodies stick together, momentum gives the common speed; then compare the kinetic energies before and after to find what was lost.

Worked examples

Example 1: Energy on a playground slide

A 30 kg child slides from rest down a slide whose top is 5.0 m above its bottom. Taking g=10 m/s2g = 10\ \text{m/s}^2: (a) how fast would the child be moving at the bottom without friction? (b) In fact the child reaches the bottom at 8.0 m/s. How much energy became heat?

  1. Without friction, mgh=12mv2mgh = \frac{1}{2}mv^2, so v2=2gh=2×10×5=100v^2 = 2gh = 2 \times 10 \times 5 = 100 and v=10 m/sv = 10\ \text{m/s}. The mass cancels, and the shape of the slide does not matter.

  2. Potential energy at the top: Ep=mgh=30×10×5=1500 JE_p = mgh = 30 \times 10 \times 5 = 1500\ \text{J}.

  3. Kinetic energy actually reached: Ek=12×30×82=15×64=960 JE_k = \frac{1}{2} \times 30 \times 8^2 = 15 \times 64 = 960\ \text{J}.

  4. The difference was done as work against friction: 1500−960=540 J1500 - 960 = 540\ \text{J}.

Answer

Without friction the child would reach 10 m/s; in fact 540 J became heat. Dropping the 2 from v2=2ghv^2 = 2gh gives 50≈7.1 m/s\sqrt{50} \approx 7.1\ \text{m/s}, which is slower than the real speed with friction: a sure sign of a slip.

Example 2: Two trolleys that couple together

A 2.0 kg trolley moving at 6.0 m/s runs into a stationary 1.0 kg trolley, and they couple together. Find their speed just afterwards and the kinetic energy lost.

  1. Momentum before: 2×6+1×0=12 kg m/s2 \times 6 + 1 \times 0 = 12\ \text{kg m/s}.

  2. Momentum after is the same: (2+1)v=12(2 + 1)v = 12, so v=4.0 m/sv = 4.0\ \text{m/s}.

  3. Kinetic energy before: 12×2×62=36 J\frac{1}{2} \times 2 \times 6^2 = 36\ \text{J}. After: 12×3×42=24 J\frac{1}{2} \times 3 \times 4^2 = 24\ \text{J}.

  4. Loss: 36−24=12 J36 - 24 = 12\ \text{J}, a third of the original, turned into heat, sound and deformation.

Answer

The coupled trolleys move at 4.0 m/s, and 12 J of kinetic energy is lost. Using conservation of kinetic energy instead, 12×3×v2=36\frac{1}{2} \times 3 \times v^2 = 36, gives v=24≈4.9 m/sv = \sqrt{24} \approx 4.9\ \text{m/s}: wrong, because a collision in which the bodies stick is inelastic.

Example 3: The power of a hoist

An electric hoist lifts a 50 kg load through 12 m at constant speed in 10 s. Taking g=10 m/s2g = 10\ \text{m/s}^2, find its useful power output. If it draws 800 W of electrical power, what is its efficiency?

  1. At constant speed the lifting force equals the weight: F=mg=500 NF = mg = 500\ \text{N}.

  2. Work done on the load: W=Fs=500×12=6000 JW = Fs = 500 \times 12 = 6000\ \text{J}, so P=600010=600 WP = \frac{6000}{10} = 600\ \text{W}.

  3. Check by a second route: the speed is 1210=1.2 m/s\frac{12}{10} = 1.2\ \text{m/s}, and P=Fv=500×1.2=600 WP = Fv = 500 \times 1.2 = 600\ \text{W}.

  4. Efficiency: 600800=0.75\frac{600}{800} = 0.75, or 75%.

Answer

The useful power is 600 W and the efficiency is 75%. Using the mass instead of the weight gives 60 W, ten times too small.

Common traps

  • Treating kinetic energy as proportional to speed

    Kinetic energy goes with v2v^2. Doubling a car's speed quadruples its kinetic energy, so at the same braking force it needs four times the stopping distance, not twice.

  • Conserving kinetic energy in a collision where bodies stick

    Only momentum is guaranteed to be conserved in a collision. When bodies stick together, the collision is perfectly inelastic: find the speed from momentum, never from kinetic energy.

  • Ignoring the signs of momentum

    A 2 kg ball at +3 m/s and a 1 kg ball at −6 m/s have a total momentum of 6−6=06 - 6 = 0, not 12 kg m/s. Choose a positive direction and give every velocity its sign before you add.

  • Counting work for a perpendicular force

    Carrying a bag across a level floor at constant velocity, your upward force on the bag does no work on it, because the bag moves at right angles to that force. Work needs a component of the force along the displacement.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Speed after a fall

Energy

A 0.50 kg ball is dropped from rest from a height of 20 m. Ignoring air resistance and taking g=10 m/s2g = 10\ \text{m/s}^2, with what speed does it reach the ground?

Show the answer

Answer: B. 20 m/s20\ \text{m/s}

Working

Energy is conserved: mgh=12mv2mgh = \frac{1}{2}mv^2, so v=2gh=400=20 m/sv = \sqrt{2gh} = \sqrt{400} = 20\ \text{m/s}. Second route: the fall takes t=2hg=2 st = \sqrt{\frac{2h}{g}} = 2\ \text{s}, and v=gt=20 m/sv = gt = 20\ \text{m/s}.

Why the other options are wrong

  • A. Comes from v2=ghv^2 = gh, which drops the factor 2 in v2=2ghv^2 = 2gh.
  • C. Keeps the mass on one side only, writing 12×0.5×v2=gh\frac{1}{2} \times 0.5 \times v^2 = gh; the mass multiplies both energies and cancels.
  • D. Writes v=ghv = gh, whose units are m2/s2\text{m}^2/\text{s}^2, not those of a speed.
  • E. This is v2=2gh=400 m2/s2v^2 = 2gh = 400\ \text{m}^2/\text{s}^2, with the square root forgotten.

What carries over

In energy conservation for a fall, the mass cancels: the speed depends only on the height.

Question 2: Two skaters push apart

Momentum

Two skaters, of 60 kg and 40 kg, stand at rest on smooth ice. They push each other apart, and the 40 kg skater moves off at 3.0 m/s. What is the velocity of the 60 kg skater?

Show the answer

Answer: C. 2.0 m/s in the opposite direction to the 40 kg skater

Working

The total momentum is zero before and after. The 40 kg skater has 40×3=120 kg m/s40 \times 3 = 120\ \text{kg m/s}, so the 60 kg skater has 120 kg m/s the other way: v=12060=2.0 m/sv = \frac{120}{60} = 2.0\ \text{m/s}, opposite. Second route: the two forces are equal and act for the same time, so the accelerations are in the ratio 40:6040 : 60, and the speeds in the ratio 2:32 : 3.

Why the other options are wrong

  • A. Assumes the skater who pushes stays still; the push acts on both, and the total momentum must stay zero.
  • B. The size is right but not the direction: equal and opposite momenta need opposite velocities.
  • D. Makes the speeds equal instead of the momenta; the forces are equal, but the heavier skater gains less speed.
  • E. Inverts the mass ratio, 3×60403 \times \frac{60}{40}; the heavier skater must move more slowly, not faster.

What carries over

Parts of a system that starts at rest move off with equal and opposite momenta, so each speed is inversely proportional to its mass.

Question 3: Braking from twice the speed

Energy

A car braking with a constant force stops in 40 m from a speed of 20 m/s. With the same braking force, what distance does it need to stop from 40 m/s?

Show the answer

Answer: C. 160 m

Working

The brakes do work Fd=12mv2Fd = \frac{1}{2}mv^2, so with FF fixed, dd is proportional to v2v^2. Doubling the speed multiplies the distance by 4: 4×40=160 m4 \times 40 = 160\ \text{m}. Second route: the deceleration is fixed, and v2=2adv^2 = 2ad gives the same proportionality.

Why the other options are wrong

  • A. Assumes the distance depends only on the force; the work the brakes must do equals the kinetic energy, which depends on the speed.
  • B. Scales the distance in proportion to the speed; kinetic energy goes with the square of the speed.
  • D. Scales the distance with the cube of the speed, a factor of 8; the work–energy theorem gives the square.
  • E. Uses a factor of 16, squaring the correct factor of 4 a second time.

What carries over

At a fixed braking force, the stopping distance grows with the square of the speed.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

Work done by a force
W=Fscos⁡θW = Fs\cos\theta, in joules; it is zero when the force is perpendicular to the displacement.
Kinetic and gravitational potential energy
Ek=12mv2E_k = \frac{1}{2}mv^2 and Ep=mghE_p = mgh. Doubling the speed quadruples the kinetic energy.
Speed after falling through a height h
v=2ghv = \sqrt{2gh}, whatever the mass and, without friction, whatever the path.
Power
Work or energy per unit time, P=WtP = \frac{W}{t}, in watts; at constant velocity, P=FvP = Fv.
Impulse
F Δt=ΔpF\,\Delta t = \Delta p: the same change of momentum over a longer time needs a smaller force.
Elastic versus inelastic collisions
Momentum is conserved in both. Kinetic energy is conserved only in an elastic collision, and the loss is largest when the bodies stick together.

Key points

  • Work is Fscos⁡θFs\cos\theta, and it is zero for a force perpendicular to the motion.

  • The net work done on a body equals its change in kinetic energy.

  • Without friction, kinetic plus potential energy stays constant; with friction, the loss becomes heat.

  • Momentum is conserved in every collision; kinetic energy only in elastic ones.

  • Power is Wt\frac{W}{t}, or FvFv at constant velocity.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.