Lesson 28 of 46 · Chemistry

Inorganic nomenclature

Name and write formulas for oxides, hydroxides, acids and salts, in IUPAC and traditional styles, starting from oxidation numbers.

About 24 minutes

In this lesson

  • Assign oxidation numbers and use them to name binary compounds with Stock numbers and with prefixes.
  • Name oxides, hydroxides, binary acids and oxyacids, and link an acidic oxide to its acid.
  • Name salts from their acids (-ide, -ite, -ate, including hydrogen salts) and write a correct formula from a name.

The idea

Start from oxidation numbers

Every naming rule rests on oxidation numbers, so fix them first:

  • An element on its own is 0 (O2\mathrm{O_2}, Fe\mathrm{Fe}).
  • A monatomic ion has its charge: Na+\mathrm{Na^{+}} is +1+1, S2−\mathrm{S^{2-}} is −2-2.
  • Group 1 metals are +1+1 and group 2 metals +2+2 in compounds; fluorine is always −1-1.
  • Oxygen is usually −2-2 (but −1-1 in peroxides such as H2O2\mathrm{H_2O_2}).
  • Hydrogen is +1+1 with non-metals (but −1-1 in metal hydrides such as NaH\mathrm{NaH}).
  • The oxidation numbers in a neutral compound add up to 0; in an ion, to its charge.

For example, in H2SO4\mathrm{H_2SO_4}: 2(+1)+x+4(−2)=02(+1) + x + 4(-2) = 0, so sulfur is +6+6.

Two naming systems

IUPAC names use either prefixes for the number of atoms (mono-, di-, tri-, tetra-, penta-, hexa-, hepta-) or a Stock number, a Roman numeral for the oxidation number of a metal. Traditional names use suffixes: -ous for the lower and -ic for the higher oxidation number, often on the Latin root (ferrous and ferric for iron, cuprous and cupric for copper). You need to read both.

Formula IUPAC Traditional
FeCl2\mathrm{FeCl_2} iron(II) chloride ferrous chloride
FeCl3\mathrm{FeCl_3} iron(III) chloride ferric chloride
Cu2O\mathrm{Cu_2O} copper(I) oxide cuprous oxide
CO2\mathrm{CO_2} carbon dioxide carbonic anhydride

Binary compounds

In an ionic binary compound the metal comes first and the non-metal takes the ending -ide: sodium chloride, magnesium oxide, aluminium sulfide, calcium hydride. Metals with one common charge (groups 1 and 2, aluminium, zinc) need no numeral. Ionic compounds do not need prefixes, because the charges already fix the formula: CaCl2\mathrm{CaCl_2} is usually just calcium chloride (the fully systematic "calcium dichloride" is also correct).

Two non-metals are named with prefixes: CO\mathrm{CO} carbon monoxide, SO3\mathrm{SO_3} sulfur trioxide, N2O5\mathrm{N_2O_5} dinitrogen pentoxide, Cl2O7\mathrm{Cl_2O_7} dichlorine heptoxide. "Mono-" is dropped on the first element.

Oxides and hydroxides

Metal oxides are basic: with water they give hydroxides. Non-metal oxides are acidic: with water they give oxyacids, which is why older names call them anhydrides ("acid without water").

CaO+H2O→Ca(OH)2SO3+H2O→H2SO4\mathrm{CaO} + \mathrm{H_2O} \rightarrow \mathrm{Ca(OH)_2} \qquad \mathrm{SO_3} + \mathrm{H_2O} \rightarrow \mathrm{H_2SO_4}

The central atom keeps its oxidation number when the oxide becomes an acid: sulfur is +6+6 in both SO3\mathrm{SO_3} and H2SO4\mathrm{H_2SO_4}, and +4+4 in both SO2\mathrm{SO_2} and H2SO3\mathrm{H_2SO_3}. That link lets you go from an oxide to its acid without memorising pairs.

Hydroxides contain the hydroxide ion OH−\mathrm{OH^{-}}: sodium hydroxide NaOH\mathrm{NaOH}, calcium hydroxide Ca(OH)2\mathrm{Ca(OH)_2}, aluminium hydroxide Al(OH)3\mathrm{Al(OH)_3}, iron(III) hydroxide Fe(OH)3\mathrm{Fe(OH)_3} (ferric hydroxide).

Acids

Binary acids (hydracids) contain hydrogen and a non-metal, and in water are named hydro-...-ic acid: HF\mathrm{HF} hydrofluoric, HCl\mathrm{HCl} hydrochloric, HBr\mathrm{HBr} hydrobromic, H2S\mathrm{H_2S} hydrosulfuric acid.

Oxyacids also contain oxygen. The higher oxidation number of the central atom takes -ic, the lower -ous; when an element forms four, per-...-ic is the highest and hypo-...-ous the lowest:

Acid Name Oxidation number
HClO\mathrm{HClO} hypochlorous acid Cl +1+1
HClO2\mathrm{HClO_2} chlorous acid Cl +3+3
HClO3\mathrm{HClO_3} chloric acid Cl +5+5
HClO4\mathrm{HClO_4} perchloric acid Cl +7+7
HNO2\mathrm{HNO_2} / HNO3\mathrm{HNO_3} nitrous / nitric acid N +3+3 / +5+5
H2SO3\mathrm{H_2SO_3} / H2SO4\mathrm{H_2SO_4} sulfurous / sulfuric acid S +4+4 / +6+6
H2CO3\mathrm{H_2CO_3} carbonic acid C +4+4
H3PO4\mathrm{H_3PO_4} phosphoric acid P +5+5

Salts

A salt is what you get when the hydrogen of an acid is replaced by a metal (or by ammonium, NH4+\mathrm{NH_4^{+}}). The anion's name comes from the acid:

  • -ic acid gives an -ate salt: sulfuric acid, sodium sulfate Na2SO4\mathrm{Na_2SO_4}.
  • -ous acid gives an -ite salt: sulfurous acid, sodium sulfite Na2SO3\mathrm{Na_2SO_3}.
  • hydro-...-ic acid gives an -ide salt: hydrochloric acid, sodium chloride.
  • The prefixes per- and hypo- stay: perchlorate ClO4−\mathrm{ClO_4^{-}}, hypochlorite ClO−\mathrm{ClO^{-}}.

If only some of the hydrogens are replaced, the salt keeps them and says so: NaHCO3\mathrm{NaHCO_3} is sodium hydrogencarbonate (traditionally sodium bicarbonate), NaH2PO4\mathrm{NaH_2PO_4} is sodium dihydrogenphosphate.

From name to formula

Write each ion with its charge, then take the smallest numbers that make the total zero, with brackets around a polyatomic ion that appears more than once. Aluminium sulfate: Al3+\mathrm{Al^{3+}} and SO42−\mathrm{SO_4^{2-}}; three sulfates (−6-6) balance two aluminiums (+6+6), giving Al2(SO4)3\mathrm{Al_2(SO_4)_3}. Ammonium phosphate: three NH4+\mathrm{NH_4^{+}} balance one PO43−\mathrm{PO_4^{3-}}, giving (NH4)3PO4\mathrm{(NH_4)_3PO_4}.

The ions worth knowing by heart: hydroxide OH−\mathrm{OH^{-}}, nitrate NO3−\mathrm{NO_3^{-}}, nitrite NO2−\mathrm{NO_2^{-}}, sulfate SO42−\mathrm{SO_4^{2-}}, sulfite SO32−\mathrm{SO_3^{2-}}, carbonate CO32−\mathrm{CO_3^{2-}}, phosphate PO43−\mathrm{PO_4^{3-}}, ammonium NH4+\mathrm{NH_4^{+}}, and the four chlorine oxyanions above.

Worked examples

Example 1: From a name to a formula

Write the formula of iron(III) sulfate and give its traditional name.

  1. Iron(III) is Fe3+\mathrm{Fe^{3+}}; sulfate is SO42−\mathrm{SO_4^{2-}}.

  2. The smallest common multiple of 3 and 2 is 6: two Fe3+\mathrm{Fe^{3+}} give +6+6, three SO42−\mathrm{SO_4^{2-}} give −6-6.

  3. Put sulfate in brackets because there is more than one: Fe2(SO4)3\mathrm{Fe_2(SO_4)_3}.

  4. Iron's higher common oxidation number is +3+3, so the traditional name uses -ic: ferric sulfate.

Answer

Fe2(SO4)3\mathrm{Fe_2(SO_4)_3}, ferric sulfate. Writing Fe3SO4\mathrm{Fe_3SO_4} reads the III as a number of iron atoms; the numeral is the charge.

Example 2: Naming an oxyacid and its salt

Name HClO2\mathrm{HClO_2} and its sodium salt NaClO2\mathrm{NaClO_2}.

  1. Find chlorine's oxidation number: +1+x+2(−2)=0+1 + x + 2(-2) = 0, so x=+3x = +3.

  2. Chlorine's oxyacids run +1+1, +3+3, +5+5, +7+7: hypo-...-ous, -ous, -ic, per-...-ic. So +3+3 is chlorous acid.

  3. An -ous acid gives an -ite salt: NaClO2\mathrm{NaClO_2} is sodium chlorite.

Answer

Chlorous acid and sodium chlorite. "Sodium chlorate" is the tempting slip: chlorate is ClO3−\mathrm{ClO_3^{-}}, with chlorine at +5+5.

Example 3: From an acidic oxide to an acid and a salt

Name N2O5\mathrm{N_2O_5}, give the acid it forms with water, and name that acid's potassium salt.

  1. Two non-metals: use prefixes. N2O5\mathrm{N_2O_5} is dinitrogen pentoxide.

  2. Nitrogen's oxidation number: 2x+5(−2)=02x + 5(-2) = 0, so x=+5x = +5.

  3. With water: N2O5+H2O→2 HNO3\mathrm{N_2O_5} + \mathrm{H_2O} \rightarrow 2\,\mathrm{HNO_3}. Nitrogen stays +5+5, the higher of its two oxyacid states, so the acid is nitric acid.

  4. An -ic acid gives an -ate salt: KNO3\mathrm{KNO_3} is potassium nitrate.

Answer

Dinitrogen pentoxide gives nitric acid, HNO3\mathrm{HNO_3}, whose potassium salt is potassium nitrate. Nitrous acid would need nitrogen at +3+3, from N2O3\mathrm{N_2O_3}.

Common traps

  • Reading the Roman numeral as a subscript

    The numeral is the metal's oxidation number, not how many atoms there are. Copper(I) oxide is Cu2O\mathrm{Cu_2O} and iron(III) oxide is Fe2O3\mathrm{Fe_2O_3}. Balance the charges to get the subscripts.

  • Swapping -ite and -ate

    -ate goes with -ic acids and the higher oxidation number; -ite with -ous acids and the lower. Sulfate has one more oxygen than sulfite, and nitrate one more than nitrite. If unsure, compute the oxidation number.

  • Assuming -ic always means +3

    The -ous and -ic suffixes mean "lower" and "higher", not fixed numbers. Ferric is iron(III), but cupric is copper(II) and cuprous is copper(I). Translate a traditional name into a Stock number for that metal before writing the formula.

  • Treating a hydrogen salt as an acid

    NaHCO3\mathrm{NaHCO_3} is a salt, sodium hydrogencarbonate, not "sodium carbonic acid". The "hydrogen" in the name counts the hydrogens left in the anion.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Naming a chlorine oxyanion salt

Inorganic nomenclature

What is the name of KClO3\mathrm{KClO_3}?

Show the answer

Answer: D. Potassium chlorate

Working

Chlorine's oxidation number: +1+x+3(−2)=0+1 + x + 3(-2) = 0, so x=+5x = +5. That is chloric acid, HClO3\mathrm{HClO_3}, and an -ic acid gives an -ate salt: potassium chlorate.

Why the other options are wrong

  • A. Perchlorate is ClO4−\mathrm{ClO_4^{-}}, with chlorine at +7+7; here there are only three oxygens.
  • B. Chlorite is ClO2−\mathrm{ClO_2^{-}}, with chlorine at +3+3; this swaps -ite and -ate.
  • C. Hypochlorite is ClO−\mathrm{ClO^{-}}, with chlorine at +1+1.
  • E. Chloride is Cl−\mathrm{Cl^{-}} with no oxygen; that name is for KCl\mathrm{KCl}.

What carries over

Compute the central atom's oxidation number, find the acid, then turn -ic into -ate and -ous into -ite.

Question 2: Writing a formula

Inorganic nomenclature

What is the formula of calcium phosphate?

Show the answer

Answer: A. Ca3(PO4)2\mathrm{Ca_3(PO_4)_2}

Working

Calcium is Ca2+\mathrm{Ca^{2+}} and phosphate PO43−\mathrm{PO_4^{3-}}. The smallest common multiple of 2 and 3 is 6: three calcium ions give +6+6, two phosphates give −6-6. The formula is Ca3(PO4)2\mathrm{Ca_3(PO_4)_2}.

Why the other options are wrong

  • B. This swaps the subscripts: two Ca2+\mathrm{Ca^{2+}} give +4+4 and three phosphates −9-9, so it is not neutral.
  • C. One calcium (+2+2) cannot balance one phosphate (−3-3).
  • D. This is calcium hydrogenphosphate, a salt that still contains one acidic hydrogen; the name asked for has none.
  • E. The charges total +2+2 and −6-6; the formula is not neutral.

What carries over

Balance the ion charges to zero with the smallest whole numbers, and bracket a repeated polyatomic ion.

Question 3: Matching an oxide to its acid

Inorganic nomenclature

Which pairing of an acidic oxide with the acid it forms with water is correct?

Show the answer

Answer: B. N2O5\mathrm{N_2O_5} gives nitric acid, HNO3\mathrm{HNO_3}

Working

Nitrogen is +5+5 in N2O5\mathrm{N_2O_5} (2x=102x = 10), and N2O5+H2O→2 HNO3\mathrm{N_2O_5} + \mathrm{H_2O} \rightarrow 2\,\mathrm{HNO_3} keeps it at +5+5: nitric acid. In every other pairing the oxidation number of the central atom changes between oxide and acid, or the formula is wrong.

Why the other options are wrong

  • A. Sulfur is +4+4 in SO2\mathrm{SO_2} and stays +4+4: the acid is sulfurous acid, H2SO3\mathrm{H_2SO_3}.
  • C. CO2+H2O\mathrm{CO_2} + \mathrm{H_2O} gives H2CO3\mathrm{H_2CO_3}; the formula shown has one oxygen too many.
  • D. Chlorine is +7+7 in Cl2O7\mathrm{Cl_2O_7}, so the acid is perchloric acid, HClO4\mathrm{HClO_4}.
  • E. Nitrogen is +3+3 in N2O3\mathrm{N_2O_3}, so the acid is nitrous acid, HNO2\mathrm{HNO_2}.

What carries over

An acidic oxide and its acid have the central atom at the same oxidation number.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

Oxidation number of oxygen and hydrogen
Oxygen is usually −2 (−1 in peroxides). Hydrogen is +1 with non-metals and −1 in metal hydrides.
What does iron(III) mean?
Iron with oxidation number +3+3, Fe3+\mathrm{Fe^{3+}}; traditionally "ferric". Iron(II) is "ferrous".
Chlorine oxyacids in order
HClO\mathrm{HClO} hypochlorous (+1), HClO2\mathrm{HClO_2} chlorous (+3), HClO3\mathrm{HClO_3} chloric (+5), HClO4\mathrm{HClO_4} perchloric (+7).
Acid ending to salt ending
-ic acid → -ate salt; -ous acid → -ite salt; hydro-...-ic acid → -ide salt.
Basic and acidic oxides
Metal oxides are basic and form hydroxides with water (CaO→Ca(OH)2\mathrm{CaO} \rightarrow \mathrm{Ca(OH)_2}). Non-metal oxides are acidic and form oxyacids (SO3→H2SO4\mathrm{SO_3} \rightarrow \mathrm{H_2SO_4}).
NaHCO3\mathrm{NaHCO_3}
Sodium hydrogencarbonate, traditionally sodium bicarbonate: a salt in which one of carbonic acid's two hydrogens remains.

Key points

  • Assign oxidation numbers first; every name follows from them.

  • Stock numerals give the metal's oxidation number; prefixes count atoms and are needed for compounds of two non-metals.

  • Metal oxides are basic and give hydroxides; non-metal oxides are acidic and give oxyacids with the same oxidation number.

  • Acid to salt: -ic becomes -ate, -ous becomes -ite, hydro-...-ic becomes -ide; per- and hypo- stay.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.