Lesson 29 of 46 · Chemistry
Moles and stoichiometry
Convert between mass, moles and particles, use balanced equations to find reacting amounts and limiting reagents, and work out empirical formulas.
About 22 minutes
In this lesson
- Convert between mass, amount in moles, number of particles and gas volume.
- Use the mole ratio of a balanced equation to find reacting masses, the limiting reagent and the percentage yield.
- Find an empirical formula from percentage composition, and a molecular formula from the molar mass.
The idea
The mole
Atoms are far too small to count one by one, so chemists count them in moles. One mole is particles, the Avogadro constant . The number is chosen so that one mole of a substance has a mass in grams equal to its relative formula mass: one mole of carbon atoms is about 12 g, one mole of water () is 18 g.
That mass per mole is the molar mass , in g/mol. Three relations connect everything:
where is the amount in moles, the mass, the number of particles and the molar volume of a gas (about 22.4 L/mol at 0 °C and 1 atm; see the lesson on gases).
Molar masses are sums. With , , , , : is g/mol and is g/mol. Watch elements that exist as molecules: oxygen gas is , 32 g/mol, not 16.
A mole of molecules contains more than a mole of atoms. One mole of contains 2 mol of H atoms, 1 mol of S and 4 mol of O. Read carefully whether a question asks about molecules, atoms or ions.
Balanced equations speak in moles
A balanced equation conserves every kind of atom, and so conserves mass. Its coefficients give the mole ratio in which substances react and form:
reads "1 mol of methane reacts with 2 mol of oxygen to give 1 mol of carbon dioxide and 2 mol of water". It does not say that 1 g of methane reacts with 2 g of oxygen. Coefficients are about amounts, never masses.
To balance an equation, change coefficients, never subscripts (a subscript changes the substance). Balance elements that appear in one compound on each side first, and leave elements that appear on their own, such as , until last.
The route for any reacting-amount problem
- Balance the equation.
- Convert what you are given into moles.
- Use the mole ratio to get moles of what you want.
- Convert back to mass, particles or volume.
Mass to mass never goes direct; it always passes through moles.
Limiting reagent
When two reactants are given, one usually runs out first. That limiting reagent decides how much product forms; the other is in excess, and some of it is left over. To find it, divide the moles of each reactant by its coefficient: the smaller result is the limiting one. Comparing masses, or even raw moles, without the coefficients is the classic error.
Percentage yield
The mass calculated from the limiting reagent is the theoretical yield. Real reactions give less (incomplete reaction, side reactions, losses), so
Percentage composition and formulas
The mass percentage of an element in a compound is its total mass in one mole divided by the molar mass. Nitrogen in ammonium nitrate, (): .
Going the other way gives the empirical formula, the simplest whole-number ratio of atoms:
- Assume 100 g, so each percentage becomes a mass in grams.
- Divide each mass by the element's molar mass to get moles.
- Divide by the smallest number of moles to get a ratio; round to whole numbers (if a ratio ends in .5, double everything).
The molecular formula is a whole-number multiple of the empirical formula. Divide the molar mass by the empirical formula mass to find the multiple. Glucose, , and methanal, , share the empirical formula .
Doing it by hand
Nothing in the IMAT rules allows a calculator, so practise by hand with friendly numbers: quantities that are simple fractions or multiples of a mole. Keep amounts as fractions ( mol, mol) and simplify before multiplying. If an answer needs long division, check whether you have converted to moles at the right point.
Worked examples
Example 1: Mass of product from mass of reactant
What mass of carbon dioxide forms when 8 g of methane burns completely? ()
Moles of methane: g/mol, so mol.
Mole ratio , so 0.5 mol of forms.
Mass: g/mol, so g.
Check by proportion: 16 g of methane gives 44 g of , and 8 g is half of that, so 22 g.
Answer
22 g of carbon dioxide. Answering 8 g (assuming mass is conserved between one reactant and one product) skips the conversion through moles.
Example 2: Finding the limiting reagent
6 g of hydrogen and 32 g of oxygen react: . What mass of water forms, and what is left over?
Moles: : mol; : mol.
Divide by coefficients: : ; : . Oxygen gives the smaller number, so it is limiting.
1 mol of uses 2 mol of and forms 2 mol of water: g.
Hydrogen left: mol, which is 2 g. Mass check: g before, g after.
Answer
36 g of water form and 2 g of hydrogen are left over. Choosing oxygen as the excess reagent because its mass (32 g) is larger is the tempting mistake.
Example 3: From percentages to a molecular formula
A compound contains 40.0% carbon, 6.7% hydrogen and 53.3% oxygen by mass, and its molar mass is 180 g/mol. Find its empirical and molecular formulas.
In 100 g: 40.0 g C, 6.7 g H, 53.3 g O.
Moles: C ; H ; O .
Divide by the smallest (3.33): C 1, H about 2, O 1. Empirical formula , mass g/mol.
Multiple: , so the molecular formula is . Check: .
Answer
Empirical formula , molecular formula . Using the mass ratio 40 : 6.7 : 53.3 directly, without dividing by molar masses, gives a meaningless formula.
Common traps
Reading coefficients as masses
In , 2 g of hydrogen does not react with 1 g of oxygen. The ratio 2 : 1 is in moles; in grams it is 4 : 32. Convert to moles before you use any coefficient.
Picking the limiting reagent by mass or raw moles
The reactant with less mass, or fewer moles, is not necessarily limiting. Divide each amount in moles by its coefficient and compare those numbers.
Atomic and molecular molar masses
Oxygen, nitrogen, hydrogen and the halogens are diatomic as elements: is 32 g/mol, 28 g/mol, 71 g/mol. Using the atomic value doubles the number of moles you calculate.
Molecules or atoms?
Half a mole of is 0.5 mol of molecules but 2 mol of oxygen atoms. Before answering, underline what the question counts.
Check yourself
Choose an answer to each question: you will see at once whether it is right, and why.
Question 1: Counting atoms in moles
The mole
How many moles of oxygen atoms are there in 49 g of sulfuric acid, ? (, , )
Show the answer
Answer: C. 2
Working
g/mol, so 49 g is mol of molecules. Each molecule has 4 oxygen atoms: mol of oxygen atoms.
Why the other options are wrong
- A. This divides the 0.5 mol of molecules by 4 instead of multiplying; each molecule has four oxygen atoms.
- B. This is the amount of sulfuric acid molecules, not of oxygen atoms.
- D. Four is the number of oxygen atoms per molecule, or the moles in a whole mole of acid; here there is only half a mole.
- E. 32 is the mass in grams of the oxygen in 49 g of the acid, not its amount in moles.
What carries over
Find the moles of the substance first, then multiply by the number of the atoms asked for in each formula unit.
Question 2: How much ammonia?
Stoichiometry
56 g of nitrogen and 6 g of hydrogen react according to . What is the greatest mass of ammonia that can form? (, )
Show the answer
Answer: D. 34 g
Working
Moles: ; . Divided by the coefficients: and , so hydrogen is limiting. 3 mol of gives mol of , and g.
Why the other options are wrong
- A. This finds 1 mol of ammonia from 3 mol of hydrogen, forgetting that the equation gives 2 mol of ammonia per 3 mol of hydrogen.
- B. This treats nitrogen as limiting (2 mol of to 4 mol of ammonia), but 2 mol of would need 6 mol of hydrogen, and there are only 3.
- C. This adds the two masses, as if both reactants were used up; nitrogen is in excess.
- E. This uses a 1 : 1 ratio between hydrogen and ammonia, giving 3 mol; the equation's ratio is 3 : 2.
What carries over
Divide each reactant's moles by its coefficient; the smaller number marks the limiting reagent, and it alone sets the yield.
Question 3: An empirical formula
Stoichiometry
An oxide of nitrogen contains 30.4% nitrogen by mass. What is its empirical formula? (, )
Show the answer
Answer: A.
Working
In 100 g: 30.4 g N and 69.6 g O. Moles: and . Ratio , so N : O = 1 : 2, . Check: is just over 30%.
Why the other options are wrong
- B. is , about 47% nitrogen: far too much.
- C. is , about 64% nitrogen; this reverses which element is in excess.
- D. is , about 37% nitrogen, too much for 30.4%.
- E. is , about 26% nitrogen, too little.
What carries over
For an empirical formula, convert masses to moles before taking any ratio; a quick percentage check on each option confirms the answer.
Flashcards
Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.
- The Avogadro constant
- particles per mole.
- Mass, moles and molar mass
- : moles equal mass in grams divided by molar mass in g/mol.
- What do the coefficients of a balanced equation give?
- The mole ratio in which substances react and form, not a mass ratio.
- How to find the limiting reagent
- Convert each reactant to moles and divide by its coefficient. The smallest result is the limiting reagent.
- Percentage yield
- Actual yield divided by theoretical yield, times 100%. The theoretical yield is calculated from the limiting reagent.
- Empirical formula from percentages
- Take 100 g, divide each mass by its molar mass, divide by the smallest number of moles, and round to a whole-number ratio.
Key points
; one mole is particles, and a mole of gas occupies about 22.4 L at 0 °C and 1 atm.
Coefficients in a balanced equation are mole ratios, never mass ratios: always go through moles.
The limiting reagent has the smallest value of moles divided by coefficient, and it alone sets the amount of product.
Empirical formula: assume 100 g, convert to moles, divide by the smallest; the molecular formula is a whole-number multiple of it.
All questions here are original and written for UniExamer; none comes from the test maker.
Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.