Lesson 30 of 46 · Chemistry
Solutions, concentration and colligative properties
Work with molarity, dilution and molality, and predict boiling points, freezing points and osmosis by counting dissolved particles.
About 20 minutes
In this lesson
- Calculate molarity from a mass and a volume, and the new concentration after a dilution.
- Tell molarity from molality and say when the difference matters.
- Rank solutions by boiling point, freezing point or osmotic pressure by counting dissolved particles.
- Predict which way water moves across a membrane and what happens to a cell placed in a solution.
The idea
What a solution is
A solution is a homogeneous mixture: a solute dissolved in a solvent. In living things the solvent is water, so the solutions met in biology and medicine are aqueous. Concentration says how much solute is present in a given amount of solution or solvent, and there are several ways to express it. Each answers a slightly different question, so read which one a problem uses.
Molarity: moles per litre of solution
Molarity is the amount of solute in moles divided by the volume of solution in litres, in mol/L (often written M). If the mass is given, convert it first with . For example, of () is ; dissolved and made up to , it gives .
Two other measures are common. Mass concentration is grams per litre. A percent by mass per volume (w/v) is grams per : a w/v saline holds of in every , which is .
Dilution keeps the moles
Adding solvent changes the volume but not the amount of solute. The moles before equal the moles after:
Any volume unit works as long as both sides use the same one. When two solutions of the same solute are mixed, add the moles and add the volumes (dilute aqueous volumes are treated as additive), then divide.
Molality: moles per kilogram of solvent
Molality is in mol/kg, and the mass is that of the solvent alone. Dissolving of a solute in of water gives . Because masses do not change with temperature, molality does not either; molarity changes slightly, since a liquid expands when warmed. For dilute aqueous solutions, one litre of solution contains close to one kilogram of water, so the two measures are almost equal.
Colligative properties count particles
Four properties of a solution depend on how many solute particles are dissolved, not on what they are: the lowering of the vapour pressure, the rise of the boiling point, the fall of the freezing point and the osmotic pressure. Dissolved particles reduce the tendency of solvent molecules to escape into the vapour, so the solution must be heated further before it boils, and they disturb the ordering of the solvent into a solid, so it must be cooled further before it freezes.
What counts is the particle concentration. An ionic solute splits into ions, and the van 't Hoff factor is the number of particles per formula unit:
| Solute | Particles in water | (ideal) |
|---|---|---|
| glucose, urea, sucrose | molecules stay whole | 1 |
| , | 2 ions | 2 |
| , | 3 ions | 3 |
Measured factors are a little lower in concentrated solutions, where ions pair up, but questions use the ideal count. The changes in temperature are
where for water and . Often you need no constants at all: to rank solutions, compare .
Osmosis and osmotic pressure
A semipermeable membrane lets water through but not the solute. Water then moves by osmosis from the side with the lower particle concentration to the side with the higher one. The osmotic pressure is the pressure needed to stop that flow:
with in mol/L, and in kelvin. The product is the osmolarity, the concentration of particles.
Cells show what this means. A solution with the same particle concentration as the cytoplasm is isotonic, and the cell keeps its volume; w/v saline is isotonic with blood. In a hypotonic solution (fewer particles outside), water enters and a red blood cell swells and may burst (haemolysis). In a hypertonic solution (more particles outside), water leaves and the cell shrinks (crenation).
Keeping the arithmetic simple
Nothing in the IMAT rules allows a calculator, so choose units that keep numbers small. Millimoles per millilitre equal moles per litre, so of a solution holds without any conversion. Round at body or room temperature to a convenient value and estimate before you compute.
Worked examples
Example 1: Making a solution, then diluting it
of () is dissolved in water and made up to . Then of this solution is diluted with water to . What is the concentration of the diluted solution?
Convert the mass to moles: .
Divide by the volume in litres: .
Dilution keeps the moles, so .
Check by moles: of holds ; in is .
Answer
The diluted solution is . Dividing by instead of gives , a thousand times too small: the volume must be in litres.
Example 2: Which solution freezes lowest?
Three aqueous solutions are prepared: glucose at , at and at . Which has the lowest freezing point, and roughly what is it? ( for water.)
The freezing point falls in proportion to the molality of particles, , so find it for each.
Glucose: . Sodium chloride: . Calcium chloride: of particles.
The largest particle molality, , gives the largest depression: .
Pure water freezes at , so this solution freezes at about .
Answer
The solution freezes lowest, at about . Glucose is tempting because its molality, , is the largest number given, but it does not dissociate; calcium chloride makes the most ions per unit but is the least concentrated.
Example 3: Which way does the water move?
A membrane permeable only to water separates glucose (side 1) from (side 2) at . Which way does water flow, and what is the difference in osmotic pressure between the two sides? Take .
Compare particle concentrations, not solute concentrations: side 1 has of particles, side 2 has .
Water moves towards the higher particle concentration, so it flows from side 1 (glucose) to side 2 (salt).
The pressure difference comes from the difference in particle concentration, : .
Compute in an easy order: , and .
Answer
Water flows from the glucose side into the salt side, and the osmotic pressures differ by about . Answering "no flow, both are " is the trap: osmosis counts particles, and gives two per formula unit.
Common traps
Using the solvent volume for molarity
Molarity divides by the volume of the finished solution. "Dissolved in of water" and "made up to " are not the same in principle; molality, by contrast, uses the mass of solvent only. Check which quantity the formula needs before you divide.
Forgetting that ionic solutes dissociate
A colligative property counts particles. has three times the effect of glucose. Multiply by before comparing; ignoring it is the usual reason for picking a glucose or urea option.
Answering the volume of water instead of the volume of stock
A dilution question may ask how much concentrated solution to take, or how much water to add. gives the volume of stock; the water added is the final volume minus that. Reread the question before choosing.
Sending water the wrong way
Water moves towards the side with more dissolved particles, as if to dilute it. A cell in a hypertonic solution loses water and shrinks; in a hypotonic one it gains water and swells. Saying "water moves to where there is more water" is correct but easily turned round, so reason from the particles.
Check yourself
Choose an answer to each question: you will see at once whether it is right, and why.
Question 1: Volume of stock for a dilution
Solutions and concentration
A technician needs of hydrochloric acid and has a stock solution of . What volume of stock solution must be diluted?
Show the answer
Answer: A.
Working
Moles needed: . Volume of stock holding them: . The same from : , made up to with water.
Why the other options are wrong
- B. This is , the amount of acid in millimoles; it still has to be divided by the stock concentration, .
- C. This is the volume of water to add, , not the volume of stock asked for.
- D. This adds the stock to of water; but is the final volume of the diluted solution, not the water.
- E. The ratio is inverted (): a diluted solution needs less stock than its final volume, never more.
What carries over
In a dilution the moles of solute are fixed; find them from the target, then the stock volume that contains them.
Question 2: Highest boiling point
Colligative properties
Which of these aqueous solutions has the highest boiling point?
Show the answer
Answer: C.
Working
Boiling-point elevation is proportional to . Glucose ; potassium chloride ; magnesium chloride ; sucrose ; urea . The largest particle molality, from magnesium chloride, raises the boiling point most.
Why the other options are wrong
- A. Glucose does not dissociate, so this gives only of particles, the fewest of all.
- B. gives two ions, of particles, which is less than .
- D. The largest molality listed, but sucrose stays as whole molecules: of particles, less than .
- E. Urea is a non-electrolyte, so its particle molality is just .
What carries over
Rank colligative effects by particle concentration: multiply each molality by the number of particles per formula unit.
Question 3: Red blood cells in salt solution
Solutions and osmosis
Red blood cells are isotonic with . What happens when they are placed in ?
Show the answer
Answer: B. They shrink, because water leaves them by osmosis.
Working
holds of ions, twice the particle concentration of the isotonic (which holds ). Outside is hypertonic, so water moves out of the cells by osmosis and they shrink (crenation).
Why the other options are wrong
- A. This happens in a hypotonic solution; has more particles than the cells, so it is hypertonic.
- C. Isotonic is ; this solution has twice that particle concentration.
- D. The outcome is right but the cause is wrong: in osmosis water moves, out of the cells and towards the more concentrated outside.
- E. Treats the membrane as open to the salt; with the solute held back, water leaves the cells and they shrink.
What carries over
Compare particle concentrations inside and outside: water always moves towards the side with more particles.
Flashcards
Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.
- Molarity
- Moles of solute per litre of solution: , in mol/L.
- Dilution rule
- : adding solvent changes the volume but not the moles of solute.
- Molality
- Moles of solute per kilogram of solvent. It does not change with temperature, because masses do not.
- van 't Hoff factor
- The number of particles one formula unit gives in solution: glucose 1, 2, 3.
- Direction of osmosis
- Water crosses a semipermeable membrane from the side with fewer dissolved particles to the side with more.
- Red blood cell in a hypotonic solution
- Water enters the cell, which swells and may burst (haemolysis). In a hypertonic solution it shrinks (crenation).
Key points
Molarity is with the volume of solution in litres; molality is moles per kilogram of solvent.
Dilution keeps the moles: .
Colligative properties depend on the number of dissolved particles: multiply the concentration by the van 't Hoff factor before comparing.
Water moves by osmosis towards the higher particle concentration; cells swell in hypotonic and shrink in hypertonic solutions.
All questions here are original and written for UniExamer; none comes from the test maker.
Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.