Lesson 30 of 46 · Chemistry

Solutions, concentration and colligative properties

Work with molarity, dilution and molality, and predict boiling points, freezing points and osmosis by counting dissolved particles.

About 20 minutes

In this lesson

  • Calculate molarity from a mass and a volume, and the new concentration after a dilution.
  • Tell molarity from molality and say when the difference matters.
  • Rank solutions by boiling point, freezing point or osmotic pressure by counting dissolved particles.
  • Predict which way water moves across a membrane and what happens to a cell placed in a solution.

The idea

What a solution is

A solution is a homogeneous mixture: a solute dissolved in a solvent. In living things the solvent is water, so the solutions met in biology and medicine are aqueous. Concentration says how much solute is present in a given amount of solution or solvent, and there are several ways to express it. Each answers a slightly different question, so read which one a problem uses.

Molarity: moles per litre of solution

c=nVc = \frac{n}{V}

Molarity cc is the amount of solute nn in moles divided by the volume of solution VV in litres, in mol/L (often written M). If the mass is given, convert it first with n=mMn = \frac{m}{M}. For example, 5.85 g5.85\ \text{g} of NaCl\mathrm{NaCl} (M=58.5 g/molM = 58.5\ \text{g/mol}) is 0.100 mol0.100\ \text{mol}; dissolved and made up to 500 mL500\ \text{mL}, it gives 0.1000.500=0.200 mol/L\frac{0.100}{0.500} = 0.200\ \text{mol/L}.

Two other measures are common. Mass concentration is grams per litre. A percent by mass per volume (w/v) is grams per 100 mL100\ \text{mL}: a 0.9%0.9\% w/v saline holds 0.9 g0.9\ \text{g} of NaCl\mathrm{NaCl} in every 100 mL100\ \text{mL}, which is 9 g/L9\ \text{g/L}.

Dilution keeps the moles

Adding solvent changes the volume but not the amount of solute. The moles before equal the moles after:

c1V1=c2V2c_1 V_1 = c_2 V_2

Any volume unit works as long as both sides use the same one. When two solutions of the same solute are mixed, add the moles and add the volumes (dilute aqueous volumes are treated as additive), then divide.

Molality: moles per kilogram of solvent

b=nsolutemsolventb = \frac{n_{\text{solute}}}{m_{\text{solvent}}}

Molality bb is in mol/kg, and the mass is that of the solvent alone. Dissolving 0.50 mol0.50\ \text{mol} of a solute in 2.0 kg2.0\ \text{kg} of water gives 0.25 mol/kg0.25\ \text{mol/kg}. Because masses do not change with temperature, molality does not either; molarity changes slightly, since a liquid expands when warmed. For dilute aqueous solutions, one litre of solution contains close to one kilogram of water, so the two measures are almost equal.

Colligative properties count particles

Four properties of a solution depend on how many solute particles are dissolved, not on what they are: the lowering of the vapour pressure, the rise of the boiling point, the fall of the freezing point and the osmotic pressure. Dissolved particles reduce the tendency of solvent molecules to escape into the vapour, so the solution must be heated further before it boils, and they disturb the ordering of the solvent into a solid, so it must be cooled further before it freezes.

What counts is the particle concentration. An ionic solute splits into ions, and the van 't Hoff factor ii is the number of particles per formula unit:

Solute Particles in water ii (ideal)
glucose, urea, sucrose molecules stay whole 1
NaCl\mathrm{NaCl}, KNO3\mathrm{KNO_3} 2 ions 2
CaCl2\mathrm{CaCl_2}, Na2SO4\mathrm{Na_2SO_4} 3 ions 3

Measured factors are a little lower in concentrated solutions, where ions pair up, but questions use the ideal count. The changes in temperature are

ΔTb=i Kb bΔTf=i Kf b\Delta T_b = i\,K_b\,b \qquad \Delta T_f = i\,K_f\,b

where for water Kb=0.51 K kg/molK_b = 0.51\ \text{K kg/mol} and Kf=1.86 K kg/molK_f = 1.86\ \text{K kg/mol}. Often you need no constants at all: to rank solutions, compare i×bi \times b.

Osmosis and osmotic pressure

A semipermeable membrane lets water through but not the solute. Water then moves by osmosis from the side with the lower particle concentration to the side with the higher one. The osmotic pressure is the pressure needed to stop that flow:

Π=i c R T\Pi = i\,c\,R\,T

with cc in mol/L, R=0.0821 L atm/(mol K)R = 0.0821\ \text{L atm/(mol K)} and TT in kelvin. The product i×ci \times c is the osmolarity, the concentration of particles.

Cells show what this means. A solution with the same particle concentration as the cytoplasm is isotonic, and the cell keeps its volume; 0.9%0.9\% w/v saline is isotonic with blood. In a hypotonic solution (fewer particles outside), water enters and a red blood cell swells and may burst (haemolysis). In a hypertonic solution (more particles outside), water leaves and the cell shrinks (crenation).

Keeping the arithmetic simple

Nothing in the IMAT rules allows a calculator, so choose units that keep numbers small. Millimoles per millilitre equal moles per litre, so 25 mL25\ \text{mL} of a 0.40 mol/L0.40\ \text{mol/L} solution holds 10 mmol10\ \text{mmol} without any conversion. Round R×TR \times T at body or room temperature to a convenient value and estimate before you compute.

Worked examples

Example 1: Making a solution, then diluting it

4.0 g4.0\ \text{g} of NaOH\mathrm{NaOH} (M=40 g/molM = 40\ \text{g/mol}) is dissolved in water and made up to 250 mL250\ \text{mL}. Then 25.0 mL25.0\ \text{mL} of this solution is diluted with water to 100 mL100\ \text{mL}. What is the concentration of the diluted solution?

  1. Convert the mass to moles: n=4.040=0.10 moln = \frac{4.0}{40} = 0.10\ \text{mol}.

  2. Divide by the volume in litres: c1=0.100.250=0.40 mol/Lc_1 = \frac{0.10}{0.250} = 0.40\ \text{mol/L}.

  3. Dilution keeps the moles, so c2=c1V1V2=0.40×25.0100=0.10 mol/Lc_2 = \frac{c_1 V_1}{V_2} = \frac{0.40 \times 25.0}{100} = 0.10\ \text{mol/L}.

  4. Check by moles: 25.0 mL25.0\ \text{mL} of 0.40 mol/L0.40\ \text{mol/L} holds 10 mmol10\ \text{mmol}; 10 mmol10\ \text{mmol} in 100 mL100\ \text{mL} is 0.10 mmol/mL=0.10 mol/L0.10\ \text{mmol/mL} = 0.10\ \text{mol/L}.

Answer

The diluted solution is 0.10 mol/L0.10\ \text{mol/L}. Dividing 0.10 mol0.10\ \text{mol} by 250250 instead of 0.2500.250 gives 0.0004 mol/L0.0004\ \text{mol/L}, a thousand times too small: the volume must be in litres.

Example 2: Which solution freezes lowest?

Three aqueous solutions are prepared: glucose at 0.20 mol/kg0.20\ \text{mol/kg}, NaCl\mathrm{NaCl} at 0.15 mol/kg0.15\ \text{mol/kg} and CaCl2\mathrm{CaCl_2} at 0.08 mol/kg0.08\ \text{mol/kg}. Which has the lowest freezing point, and roughly what is it? (Kf=1.86 K kg/molK_f = 1.86\ \text{K kg/mol} for water.)

  1. The freezing point falls in proportion to the molality of particles, i×bi \times b, so find it for each.

  2. Glucose: 1×0.20=0.201 \times 0.20 = 0.20. Sodium chloride: 2×0.15=0.302 \times 0.15 = 0.30. Calcium chloride: 3×0.08=0.24 mol/kg3 \times 0.08 = 0.24\ \text{mol/kg} of particles.

  3. The largest particle molality, 0.30 mol/kg0.30\ \text{mol/kg}, gives the largest depression: ΔTf=1.86×0.30=0.558≈0.56 K\Delta T_f = 1.86 \times 0.30 = 0.558 \approx 0.56\ \text{K}.

  4. Pure water freezes at 0 ∘C0\ ^\circ\text{C}, so this solution freezes at about −0.56 ∘C-0.56\ ^\circ\text{C}.

Answer

The NaCl\mathrm{NaCl} solution freezes lowest, at about −0.56 ∘C-0.56\ ^\circ\text{C}. Glucose is tempting because its molality, 0.200.20, is the largest number given, but it does not dissociate; calcium chloride makes the most ions per unit but is the least concentrated.

Example 3: Which way does the water move?

A membrane permeable only to water separates 0.10 mol/L0.10\ \text{mol/L} glucose (side 1) from 0.10 mol/L0.10\ \text{mol/L} NaCl\mathrm{NaCl} (side 2) at 300 K300\ \text{K}. Which way does water flow, and what is the difference in osmotic pressure between the two sides? Take R=0.082 L atm/(mol K)R = 0.082\ \text{L atm/(mol K)}.

  1. Compare particle concentrations, not solute concentrations: side 1 has 0.10 mol/L0.10\ \text{mol/L} of particles, side 2 has 2×0.10=0.20 mol/L2 \times 0.10 = 0.20\ \text{mol/L}.

  2. Water moves towards the higher particle concentration, so it flows from side 1 (glucose) to side 2 (salt).

  3. The pressure difference comes from the difference in particle concentration, 0.10 mol/L0.10\ \text{mol/L}: ΔΠ=0.10×0.082×300\Delta\Pi = 0.10 \times 0.082 \times 300.

  4. Compute in an easy order: 0.082×300=24.60.082 \times 300 = 24.6, and 0.10×24.6=2.46≈2.5 atm0.10 \times 24.6 = 2.46 \approx 2.5\ \text{atm}.

Answer

Water flows from the glucose side into the salt side, and the osmotic pressures differ by about 2.5 atm2.5\ \text{atm}. Answering "no flow, both are 0.10 mol/L0.10\ \text{mol/L}" is the trap: osmosis counts particles, and NaCl\mathrm{NaCl} gives two per formula unit.

Common traps

  • Using the solvent volume for molarity

    Molarity divides by the volume of the finished solution. "Dissolved in 250 mL250\ \text{mL} of water" and "made up to 250 mL250\ \text{mL}" are not the same in principle; molality, by contrast, uses the mass of solvent only. Check which quantity the formula needs before you divide.

  • Forgetting that ionic solutes dissociate

    A colligative property counts particles. 0.1 mol/L0.1\ \text{mol/L} CaCl2\mathrm{CaCl_2} has three times the effect of 0.1 mol/L0.1\ \text{mol/L} glucose. Multiply by ii before comparing; ignoring it is the usual reason for picking a glucose or urea option.

  • Answering the volume of water instead of the volume of stock

    A dilution question may ask how much concentrated solution to take, or how much water to add. c1V1=c2V2c_1 V_1 = c_2 V_2 gives the volume of stock; the water added is the final volume minus that. Reread the question before choosing.

  • Sending water the wrong way

    Water moves towards the side with more dissolved particles, as if to dilute it. A cell in a hypertonic solution loses water and shrinks; in a hypotonic one it gains water and swells. Saying "water moves to where there is more water" is correct but easily turned round, so reason from the particles.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Volume of stock for a dilution

Solutions and concentration

A technician needs 500 mL500\ \text{mL} of 0.30 mol/L0.30\ \text{mol/L} hydrochloric acid and has a stock solution of 2.0 mol/L2.0\ \text{mol/L}. What volume of stock solution must be diluted?

Show the answer

Answer: A. 75 mL75\ \text{mL}

Working

Moles needed: 0.30×0.500=0.15 mol0.30 \times 0.500 = 0.15\ \text{mol}. Volume of stock holding them: 0.152.0=0.075 L=75 mL\frac{0.15}{2.0} = 0.075\ \text{L} = 75\ \text{mL}. The same from c1V1=c2V2c_1 V_1 = c_2 V_2: V1=0.30×5002.0=75 mLV_1 = \frac{0.30 \times 500}{2.0} = 75\ \text{mL}, made up to 500 mL500\ \text{mL} with water.

Why the other options are wrong

  • B. This is 0.30×5000.30 \times 500, the amount of acid in millimoles; it still has to be divided by the stock concentration, 2.02.0.
  • C. This is the volume of water to add, 500−75500 - 75, not the volume of stock asked for.
  • D. This adds the stock to 500 mL500\ \text{mL} of water; but 500 mL500\ \text{mL} is the final volume of the diluted solution, not the water.
  • E. The ratio is inverted (2.0×500/0.302.0 \times 500 / 0.30): a diluted solution needs less stock than its final volume, never more.

What carries over

In a dilution the moles of solute are fixed; find them from the target, then the stock volume that contains them.

Question 2: Highest boiling point

Colligative properties

Which of these aqueous solutions has the highest boiling point?

Show the answer

Answer: C. 0.08 mol/kg0.08\ \text{mol/kg} MgCl2\mathrm{MgCl_2}

Working

Boiling-point elevation is proportional to i×bi \times b. Glucose 0.100.10; potassium chloride 2×0.10=0.202 \times 0.10 = 0.20; magnesium chloride 3×0.08=0.243 \times 0.08 = 0.24; sucrose 0.200.20; urea 0.120.12. The largest particle molality, 0.24 mol/kg0.24\ \text{mol/kg} from magnesium chloride, raises the boiling point most.

Why the other options are wrong

  • A. Glucose does not dissociate, so this gives only 0.10 mol/kg0.10\ \text{mol/kg} of particles, the fewest of all.
  • B. KCl\mathrm{KCl} gives two ions, 0.20 mol/kg0.20\ \text{mol/kg} of particles, which is less than 0.240.24.
  • D. The largest molality listed, but sucrose stays as whole molecules: 0.20 mol/kg0.20\ \text{mol/kg} of particles, less than 0.240.24.
  • E. Urea is a non-electrolyte, so its particle molality is just 0.12 mol/kg0.12\ \text{mol/kg}.

What carries over

Rank colligative effects by particle concentration: multiply each molality by the number of particles per formula unit.

Question 3: Red blood cells in salt solution

Solutions and osmosis

Red blood cells are isotonic with 0.15 mol/L0.15\ \text{mol/L} NaCl\mathrm{NaCl}. What happens when they are placed in 0.30 mol/L0.30\ \text{mol/L} NaCl\mathrm{NaCl}?

Show the answer

Answer: B. They shrink, because water leaves them by osmosis.

Working

0.30 mol/L0.30\ \text{mol/L} NaCl\mathrm{NaCl} holds 0.60 mol/L0.60\ \text{mol/L} of ions, twice the particle concentration of the isotonic 0.15 mol/L0.15\ \text{mol/L} (which holds 0.300.30). Outside is hypertonic, so water moves out of the cells by osmosis and they shrink (crenation).

Why the other options are wrong

  • A. This happens in a hypotonic solution; 0.30 mol/L0.30\ \text{mol/L} NaCl\mathrm{NaCl} has more particles than the cells, so it is hypertonic.
  • C. Isotonic is 0.15 mol/L0.15\ \text{mol/L} NaCl\mathrm{NaCl}; this solution has twice that particle concentration.
  • D. The outcome is right but the cause is wrong: in osmosis water moves, out of the cells and towards the more concentrated outside.
  • E. Treats the membrane as open to the salt; with the solute held back, water leaves the cells and they shrink.

What carries over

Compare particle concentrations inside and outside: water always moves towards the side with more particles.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

Molarity
Moles of solute per litre of solution: c=nVc = \frac{n}{V}, in mol/L.
Dilution rule
c1V1=c2V2c_1 V_1 = c_2 V_2: adding solvent changes the volume but not the moles of solute.
Molality
Moles of solute per kilogram of solvent. It does not change with temperature, because masses do not.
van 't Hoff factor
The number of particles one formula unit gives in solution: glucose 1, NaCl\mathrm{NaCl} 2, CaCl2\mathrm{CaCl_2} 3.
Direction of osmosis
Water crosses a semipermeable membrane from the side with fewer dissolved particles to the side with more.
Red blood cell in a hypotonic solution
Water enters the cell, which swells and may burst (haemolysis). In a hypertonic solution it shrinks (crenation).

Key points

  • Molarity is c=nVc = \frac{n}{V} with VV the volume of solution in litres; molality is moles per kilogram of solvent.

  • Dilution keeps the moles: c1V1=c2V2c_1 V_1 = c_2 V_2.

  • Colligative properties depend on the number of dissolved particles: multiply the concentration by the van 't Hoff factor before comparing.

  • Water moves by osmosis towards the higher particle concentration; cells swell in hypotonic and shrink in hypertonic solutions.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.