Lesson 39 of 46 · Physics

Fluids, pressure and buoyancy

Density, pressure with depth, Pascal's and Archimedes' principles, and flow in pipes: the fluid physics behind floating, hydraulics and drips.

About 20 minutes

In this lesson

  • Calculate pressure from force and area, and the pressure at a depth in a liquid, telling gauge from absolute pressure.
  • Apply Pascal's principle to a hydraulic press and Archimedes' principle to floating and submerged bodies.
  • Use the continuity equation and the qualitative result of Bernoulli for fluids flowing through pipes.

The idea

Density

Density is mass per unit volume, ρ=mV\rho = \frac{m}{V}, in kg/m3\text{kg/m}^3. Water has ρ≈1000 kg/m3\rho \approx 1000\ \text{kg/m}^3, which is 1 g/cm31\ \text{g/cm}^3, or 1 kg per litre. Keep the volume conversions at hand: 1 L=10−3 m31\ \text{L} = 10^{-3}\ \text{m}^3 and 1 cm3=10−6 m31\ \text{cm}^3 = 10^{-6}\ \text{m}^3.

Pressure

Pressure is the force per unit area acting perpendicular to a surface:

p=FAp = \frac{F}{A}

in pascals (1 Pa=1 N/m21\ \text{Pa} = 1\ \text{N/m}^2). The same force on a smaller area gives a larger pressure: a needle pierces skin, while snowshoes stop you sinking into snow. Atmospheric pressure at sea level is about 1.0×105 Pa1.0 \times 10^5\ \text{Pa} (more precisely 1.013×105 Pa1.013 \times 10^5\ \text{Pa}, or 760 mmHg). In a fluid at rest, the pressure at a point acts equally in all directions.

Pressure and depth

In a liquid of density ρ\rho, the pressure increases with depth hh:

p=p0+ρghp = p_0 + \rho g h

where p0p_0 is the pressure at the surface. The extra term is the weight of the liquid above, per unit area: a column of cross-section AA and height hh has weight ρAhg\rho A h g, and dividing by AA leaves ρgh\rho g h. In water every 10 m of depth adds 1000×10×10=105 Pa1000 \times 10 \times 10 = 10^5\ \text{Pa}, about one atmosphere.

Only the depth matters, not the shape or the width of the container: all points at the same depth in one connected liquid at rest are at the same pressure. That is why a liquid stands at the same level in connected vessels.

Absolute pressure includes p0p_0. Gauge pressure is the excess over atmospheric pressure, ρgh\rho g h for a liquid column. Tyre gauges and blood-pressure readings give gauge pressures.

Pascal's principle and the hydraulic press

A change of pressure applied to an enclosed liquid is passed on undiminished to every part of it. In a hydraulic press, a small force F1F_1 on a piston of area A1A_1 produces a pressure that acts on a large piston of area A2A_2:

F1A1=F2A2.\frac{F_1}{A_1} = \frac{F_2}{A_2}.

The force is multiplied by A2A1\frac{A_2}{A_1}, but energy is not created. The liquid's volume does not change, so the small piston must move A2A1\frac{A_2}{A_1} times as far as the large one, and the work put in equals the work got out.

Archimedes' principle

A body wholly or partly immersed in a fluid feels an upward buoyant force equal to the weight of the fluid it displaces:

FB=ρfluid Vsub g.F_B = \rho_{\text{fluid}}\,V_{\text{sub}}\,g.

The buoyant force exists because the pressure on the bottom of the body is greater than on its top. It depends on the density of the fluid and on the submerged volume, not on what the body is made of.

  • If the body's average density is greater than the fluid's, it sinks. Weighed while submerged, it has an apparent weight of mg−FBmg - F_B.
  • If its average density is smaller, it floats, with the buoyant force equal to its weight. The fraction of its volume below the surface is ρbodyρfluid\frac{\rho_{\text{body}}}{\rho_{\text{fluid}}}: ice, at about 920 kg/m3920\ \text{kg/m}^3, floats in fresh water with about 92% of its volume submerged.

Fluids in motion

For an incompressible fluid flowing steadily through a pipe, the same volume passes every cross-section each second. The flow rate is

Q=Av,A1v1=A2v2.Q = Av, \qquad A_1 v_1 = A_2 v_2.

Where the pipe narrows, the fluid speeds up. For an ideal fluid (one with no viscosity), Bernoulli's equation states the conservation of energy per unit volume along the flow:

p+12ρv2+ρgh=constant.p + \frac{1}{2}\rho v^2 + \rho g h = \text{constant}.

At the same height, where the speed is higher the pressure is lower. This surprises many people: in a horizontal pipe, the narrow section has the fastest flow and the lowest pressure.

Real fluids such as blood are viscous, so a pressure difference is needed just to keep them flowing along a uniform tube. For smooth, steady flow in a narrow tube, the flow rate at a given pressure difference is proportional to the fourth power of the radius (Poiseuille's law): halving the radius of a vessel cuts the flow to one sixteenth.

Worked examples

Example 1: Pressure on a diver

A diver is 20 m below the surface of a freshwater lake. Taking atmospheric pressure as 1.0×105 Pa1.0 \times 10^5\ \text{Pa}, the density of water as 1000 kg/m31000\ \text{kg/m}^3 and g=10 m/s2g = 10\ \text{m/s}^2, find the gauge pressure and the absolute pressure on the diver.

  1. The gauge pressure is the pressure of the water column alone: ρgh=1000×10×20=2.0×105 Pa\rho g h = 1000 \times 10 \times 20 = 2.0 \times 10^5\ \text{Pa}.

  2. The absolute pressure adds the atmosphere pressing on the surface: 1.0×105+2.0×105=3.0×105 Pa1.0 \times 10^5 + 2.0 \times 10^5 = 3.0 \times 10^5\ \text{Pa}.

  3. Check with the rule of thumb: each 10 m of water adds about one atmosphere, so 20 m adds two, on top of the one at the surface: about 3 atmospheres.

Answer

The gauge pressure is 2.0×105 Pa2.0 \times 10^5\ \text{Pa} and the absolute pressure 3.0×105 Pa3.0 \times 10^5\ \text{Pa}. Note that doubling the depth does not double the absolute pressure: it is 2.0×105 Pa2.0 \times 10^5\ \text{Pa} at 10 m and 3.0×105 Pa3.0 \times 10^5\ \text{Pa} at 20 m.

Example 2: A hydraulic car lift

In a hydraulic lift the small piston has an area of 10 cm210\ \text{cm}^2 and the large piston 500 cm2500\ \text{cm}^2. Taking g=10 m/s2g = 10\ \text{m/s}^2: (a) what force on the small piston supports a 1000 kg car on the large one? (b) How far must the small piston move to raise the car by 1.0 cm?

  1. The car's weight is 1000×10=10 000 N1000 \times 10 = 10\,000\ \text{N}.

  2. The pressure is the same on both pistons, so the forces are in the ratio of the areas, 50010=50\frac{500}{10} = 50. The units cancel in a ratio, so there is no need to convert to m2\text{m}^2: F1=10 00050=200 NF_1 = \frac{10\,000}{50} = 200\ \text{N}.

  3. The volume of liquid pushed out of the small cylinder enters the large one: 10×d=500×110 \times d = 500 \times 1, so d=50 cmd = 50\ \text{cm}.

  4. Check with energy: 200 N×0.50 m=100 J200\ \text{N} \times 0.50\ \text{m} = 100\ \text{J} in, and 10 000 N×0.010 m=100 J10\,000\ \text{N} \times 0.010\ \text{m} = 100\ \text{J} out.

Answer

A force of 200 N holds up the car, and the small piston must move 50 cm to lift it by 1.0 cm. The press multiplies force by 50 and divides distance by 50, so no energy is gained.

Example 3: A floating block of wood

A block of wood of volume 2.0 L and density 600 kg/m3600\ \text{kg/m}^3 floats in water. Taking g=10 m/s2g = 10\ \text{m/s}^2: (a) what volume of the block is under water? (b) What extra downward force would hold it completely under?

  1. In SI units the volume is 2.0×10−3 m32.0 \times 10^{-3}\ \text{m}^3, so the mass is 600×2.0×10−3=1.2 kg600 \times 2.0 \times 10^{-3} = 1.2\ \text{kg} and the weight 12 N.

  2. Floating, the buoyant force equals the weight: 1000×Vsub×10=121000 \times V_{\text{sub}} \times 10 = 12, so Vsub=1.2×10−3 m3=1.2 LV_{\text{sub}} = 1.2 \times 10^{-3}\ \text{m}^3 = 1.2\ \text{L}. That is 60% of the block, matching 6001000\frac{600}{1000}.

  3. Fully under water, the buoyant force is 1000×2.0×10−3×10=20 N1000 \times 2.0 \times 10^{-3} \times 10 = 20\ \text{N}.

  4. The push must make up the difference between this and the weight: 20−12=8.0 N20 - 12 = 8.0\ \text{N}.

Answer

1.2 L of the block (60%) is under water, and an extra 8.0 N holds it fully under. Answering 20 N forgets that the block's own weight already provides 12 N of the downward force.

Common traps

  • Thinking the shape of the container sets the pressure

    A tall narrow tube and a wide tank filled to the same depth with the same liquid have the same pressure at the bottom, p0+ρghp_0 + \rho g h. Volume and width do not enter; only depth does.

  • Using the body's density for the buoyant force

    The buoyant force is the weight of displaced fluid, ρfluidVsubg\rho_{\text{fluid}} V_{\text{sub}} g. A steel ball and a plastic ball of the same volume, both fully submerged in water, feel the same buoyant force; they differ only in weight.

  • Mixing up gauge and absolute pressure

    ρgh\rho g h is the gauge pressure; adding atmospheric pressure gives the absolute pressure. Read which one the question asks for, and look out for an option that differs from another by exactly 1.0×105 Pa1.0 \times 10^5\ \text{Pa}.

  • Expecting higher pressure where the flow is faster

    Intuition says a fluid squeezed through a narrow section pushes harder there. For a horizontal ideal flow, Bernoulli's equation says the opposite: the faster the flow, the lower the pressure.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Flow through a narrowing pipe

Fluids

Water flows at 2.0 m/s through a pipe of cross-sectional area 6.0 cm26.0\ \text{cm}^2, which then narrows to 2.0 cm22.0\ \text{cm}^2. Treating the water as incompressible, what is its speed in the narrow section?

Show the answer

Answer: D. 6.0 m/s

Working

Continuity: A1v1=A2v2A_1 v_1 = A_2 v_2, so 6.0×2.0=2.0×v26.0 \times 2.0 = 2.0 \times v_2 and v2=6.0 m/sv_2 = 6.0\ \text{m/s}. Check in other units: 6 cm2×200 cm/s=1200 cm3/s6\ \text{cm}^2 \times 200\ \text{cm/s} = 1200\ \text{cm}^3/\text{s}, and 2 cm2×600 cm/s=1200 cm3/s2\ \text{cm}^2 \times 600\ \text{cm/s} = 1200\ \text{cm}^3/\text{s}.

Why the other options are wrong

  • A. Inverts the ratio of the areas; to pass the same volume each second through a smaller section, the water must speed up, not slow down.
  • B. Assumes the speed stays the same; the same volume per second through a third of the area needs three times the speed.
  • C. Takes the difference of the areas, 6−2=46 - 2 = 4, as if it were a speed; it is the ratio of the areas that sets the speed.
  • E. Squares the ratio of the areas, as if 6 and 2 were radii; the speed scales with the ratio of the areas themselves.

What carries over

At a constant flow rate, the speed is inversely proportional to the cross-sectional area.

Question 2: Weighing a stone under water

Fluids

A 3.0 kg stone of volume 1.0 L hangs from a spring balance, completely submerged in water of density 1000 kg/m31000\ \text{kg/m}^3. Taking g=10 m/s2g = 10\ \text{m/s}^2, what does the balance read?

Show the answer

Answer: C. 20 N

Working

The weight is 3.0×10=30 N3.0 \times 10 = 30\ \text{N}. The stone displaces 1.0×10−3 m31.0 \times 10^{-3}\ \text{m}^3 of water, so FB=1000×1.0×10−3×10=10 NF_B = 1000 \times 1.0 \times 10^{-3} \times 10 = 10\ \text{N}. The balance reads 30−10=20 N30 - 10 = 20\ \text{N}.

Why the other options are wrong

  • A. Subtracts the volume in litres from the mass in kilograms and forgets gg; the forces involved are 30 N and 10 N.
  • B. This is the buoyant force itself; the balance supports the weight minus the buoyant force.
  • D. This is the stone's weight in air; it ignores the buoyant force.
  • E. Adds the buoyant force to the weight; buoyancy acts upwards and reduces the reading.

What carries over

A submerged body weighs less by the weight of the fluid it displaces.

Question 3: Pressure from a drip bag

Fluids

A drip bag hangs so that the surface of its liquid is 80 cm above the needle. The liquid's density is 1000 kg/m31000\ \text{kg/m}^3 and g=10 m/s2g = 10\ \text{m/s}^2. Ignoring flow, what gauge pressure does the liquid column produce at the needle?

Show the answer

Answer: C. 8.0 kPa

Working

ρgh=1000×10×0.80=8000 Pa=8.0 kPa\rho g h = 1000 \times 10 \times 0.80 = 8000\ \text{Pa} = 8.0\ \text{kPa}. Check: 10 m of water gives about 105 Pa10^5\ \text{Pa}, so 0.8 m gives 0.08×105=8000 Pa0.08 \times 10^5 = 8000\ \text{Pa}.

Why the other options are wrong

  • A. Uses the density as 1 (from 1 g/cm31\ \text{g/cm}^3) instead of 1000 kg/m31000\ \text{kg/m}^3, mixing two systems of units.
  • B. Leaves out gg, computing ρh\rho h instead of ρgh\rho g h.
  • D. Adds atmospheric pressure, which gives the absolute pressure; the question asks for the gauge pressure.
  • E. Uses the height in centimetres (80) instead of metres (0.80).

What carries over

The gauge pressure of a liquid column is ρgh\rho g h, with every quantity in SI units.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

Density of water
About 1000 kg/m31000\ \text{kg/m}^3, which is 1 g/cm31\ \text{g/cm}^3, or 1 kg per litre.
Pressure at a depth h in a liquid
p=p0+ρghp = p_0 + \rho g h; the gauge pressure is ρgh\rho g h. Only the depth matters, not the shape of the container.
Pascal's principle
A pressure change in an enclosed liquid is transmitted to every part of it, so in a hydraulic press F1A1=F2A2\frac{F_1}{A_1} = \frac{F_2}{A_2}.
Archimedes' principle
The buoyant force equals the weight of fluid displaced: FB=ρfluidVsubgF_B = \rho_{\text{fluid}} V_{\text{sub}} g.
Fraction of a floating body below the surface
ρbodyρfluid\frac{\rho_{\text{body}}}{\rho_{\text{fluid}}}; ice floats in fresh water with about 92% of its volume submerged.
Continuity and Bernoulli
A1v1=A2v2A_1 v_1 = A_2 v_2, and for an ideal fluid p+12ρv2+ρghp + \frac{1}{2}\rho v^2 + \rho g h is constant: at the same height, faster flow means lower pressure.

Key points

  • Pressure is FA\frac{F}{A}; in a liquid at rest it rises by ρgh\rho g h with depth, whatever the shape of the container.

  • Every 10 m of water adds about one atmosphere, 1.0×105 Pa1.0 \times 10^5\ \text{Pa}.

  • A hydraulic press multiplies force by the ratio of the areas, but never multiplies energy.

  • The buoyant force equals the weight of fluid displaced; a floating body displaces its own weight.

  • In steady flow A1v1=A2v2A_1v_1 = A_2v_2, and where an ideal fluid moves faster its pressure is lower.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.