Lesson 36 of 46 · Physics

Units, vectors and kinematics

SI units and prefixes, adding and resolving vectors, and the constant-acceleration equations for motion and free fall, all without a calculator.

About 20 minutes

In this lesson

  • Convert between SI prefixes and units, and check a formula or an answer by its units.
  • Add perpendicular vectors and resolve a vector into components using the sines and cosines of standard angles.
  • Choose and apply the right constant-acceleration equation, including for free fall and horizontal projectiles.

The idea

Working without a calculator

Physics shares its questions with mathematics in one IMAT area, and nothing in the IMAT rules allows a calculator. You therefore need arithmetic you can do by hand: powers of ten, simple fractions and a few square roots. Throughout this course we take g=10 m/s2g = 10\ \text{m/s}^2 for the acceleration of free fall; use it unless a question gives another value. Units are your fastest check: an answer with the wrong units is wrong whatever its number.

SI base units and prefixes

The SI has seven base units: the metre (m), kilogram (kg), second (s), ampere (A), kelvin (K), mole (mol) and candela (cd). Every other unit is built from them. A newton is 1 N=1 kg⋅m/s21\ \text{N} = 1\ \text{kg}\cdot\text{m/s}^2, a joule is a newton-metre, a watt is a joule per second and a pascal is a newton per square metre.

Prefix Symbol Factor
giga G 10910^{9}
mega M 10610^{6}
kilo k 10310^{3}
centi c 10−210^{-2}
milli m 10−310^{-3}
micro μ 10−610^{-6}
nano n 10−910^{-9}

A prefix is squared or cubed together with its unit: 1 cm2=(10−2 m)2=10−4 m21\ \text{cm}^2 = (10^{-2}\ \text{m})^2 = 10^{-4}\ \text{m}^2 and 1 cm3=10−6 m31\ \text{cm}^3 = 10^{-6}\ \text{m}^3. A litre is 1 dm3=10−3 m31\ \text{dm}^3 = 10^{-3}\ \text{m}^3. For speeds, 1 m/s=3.6 km/h1\ \text{m/s} = 3.6\ \text{km/h}, so divide a speed in km/h by 3.6: 72 km/h=20 m/s72\ \text{km/h} = 20\ \text{m/s}.

Checking with dimensions

Both sides of a correct equation have the same units. If you half-remember that the distance covered from rest at constant acceleration is 12at2\frac{1}{2}at^2, check it: m/s2×s2=m\text{m/s}^2 \times \text{s}^2 = \text{m}, a length. A formula that gave atat for a distance fails at once, because m/s2×s=m/s\text{m/s}^2 \times \text{s} = \text{m/s}, a speed. Units cannot catch a missing 12\frac{1}{2}, but they catch most wrong formulas, and they often rule out answer options before any arithmetic.

Scalars and vectors

A scalar has only a size: mass, time, energy, temperature. A vector has a size and a direction: displacement, velocity, acceleration, force. Vectors add tip to tail. Two vectors along the same line add or subtract like signed numbers; two perpendicular vectors combine by Pythagoras, so 3 units and 4 units at right angles give a resultant of 5 units.

To resolve a vector of size FF at an angle θ\theta to the horizontal, take its components

Fx=Fcos⁡θ,Fy=Fsin⁡θ.F_x = F\cos\theta, \qquad F_y = F\sin\theta.

These values are all you need without a calculator:

θ\theta 0∘0^\circ 30∘30^\circ 45∘45^\circ 60∘60^\circ 90∘90^\circ
sin⁡θ\sin\theta 00 12\frac{1}{2} 22\frac{\sqrt{2}}{2} 32\frac{\sqrt{3}}{2} 11
cos⁡θ\cos\theta 11 32\frac{\sqrt{3}}{2} 22\frac{\sqrt{2}}{2} 12\frac{1}{2} 00

With 2≈1.41\sqrt{2} \approx 1.41 and 3≈1.73\sqrt{3} \approx 1.73 you can estimate any result.

Describing motion

Distance is the length of the path travelled, a scalar; displacement is the straight-line change of position, a vector. Speed is distance divided by time; velocity is displacement divided by time. A runner who completes one 400 m lap in 80 s has an average speed of 5 m/s but an average velocity of zero, because she finishes where she started. Acceleration is the rate of change of velocity, a=ΔvΔta = \frac{\Delta v}{\Delta t}, in m/s2\text{m/s}^2.

Graphs carry the same information. On a position–time graph the slope is the velocity. On a velocity–time graph the slope is the acceleration, and the area between the line and the time axis is the displacement.

The constant-acceleration equations

When the acceleration is constant, five quantities describe the motion: the initial velocity uu, the final velocity vv, the acceleration aa, the time tt and the displacement ss. Each equation leaves one of them out:

Equation Leaves out
v=u+atv = u + at ss
s=ut+12at2s = ut + \frac{1}{2}at^2 vv
v2=u2+2asv^2 = u^2 + 2as tt
s=u+v2 ts = \frac{u + v}{2}\,t aa

Write down the three quantities you know and the one you want; the equation that leaves out the fifth is the one to use. Choose a positive direction first and give every vector quantity its sign.

Free fall and projectiles

Without air resistance, every body near the Earth's surface falls with the same acceleration gg, whatever its mass. Dropped from rest, a body falls 12gt2\frac{1}{2}gt^2 in a time tt: 5 m after one second, 20 m after two, 45 m after three. Thrown straight up at speed uu, it rises for ug\frac{u}{g} seconds to a height of u22g\frac{u^2}{2g}, then falls back.

A projectile's horizontal and vertical motions are independent. Horizontally no force acts, so the horizontal velocity stays constant; vertically the motion is free fall. The time in the air comes from the vertical motion alone, and the horizontal distance is the horizontal velocity multiplied by that time.

Worked examples

Example 1: A car braking to a stop

A car travelling at 72 km/h brakes with a constant deceleration and stops in 4.0 s. Find the deceleration and the braking distance.

  1. Convert to SI first: 72÷3.6=2072 \div 3.6 = 20, so u=20 m/su = 20\ \text{m/s}, v=0v = 0 and t=4.0 st = 4.0\ \text{s}.

  2. The equation without ss gives the acceleration: a=v−ut=0−204=−5 m/s2a = \frac{v - u}{t} = \frac{0 - 20}{4} = -5\ \text{m/s}^2. The minus sign says the acceleration opposes the motion.

  3. The equation without aa gives the distance: s=u+v2 t=20+02×4=40 ms = \frac{u + v}{2}\,t = \frac{20 + 0}{2} \times 4 = 40\ \text{m}.

  4. Check by a second route: v2=u2+2asv^2 = u^2 + 2as gives 0=400−10s0 = 400 - 10s, so s=40 ms = 40\ \text{m} again.

Answer

The deceleration is 5 m/s25\ \text{m/s}^2 and the car stops in 40 m. Leaving the speed in km/h gives 722×4=144 m\frac{72}{2} \times 4 = 144\ \text{m}, a distance far too large.

Example 2: A ball thrown horizontally from a cliff

A ball is thrown horizontally at 15 m/s from the top of a cliff 20 m high. Ignoring air resistance and taking g=10 m/s2g = 10\ \text{m/s}^2, find the time it takes to reach the ground, how far from the foot of the cliff it lands, and its speed on landing.

  1. Vertical motion first: the ball starts with zero vertical velocity, so 20=12×10×t220 = \frac{1}{2} \times 10 \times t^2, giving t2=4t^2 = 4 and t=2 st = 2\ \text{s}. The 15 m/s plays no part in this.

  2. Horizontal motion: the velocity stays at 15 m/s, so the ball lands 15×2=30 m15 \times 2 = 30\ \text{m} from the cliff.

  3. On landing the vertical velocity is gt=20 m/sgt = 20\ \text{m/s}. The two components are perpendicular, so the speed is 152+202=625=25 m/s\sqrt{15^2 + 20^2} = \sqrt{625} = 25\ \text{m/s}.

  4. Check by a second route: v2=u2+2gh=225+400=625v^2 = u^2 + 2gh = 225 + 400 = 625, so v=25 m/sv = 25\ \text{m/s}.

Answer

The ball falls for 2 s, lands 30 m from the cliff and hits the ground at 25 m/s. Adding the components as numbers, 15+20=35 m/s15 + 20 = 35\ \text{m/s}, is the tempting wrong answer: perpendicular vectors combine by Pythagoras.

Example 3: Swimming across a river

A swimmer swims at 4.0 m/s relative to the water, always heading straight across a river 80 m wide. The current flows at 3.0 m/s parallel to the banks. How long does she take to cross, how far downstream does she land, and what is her speed relative to the bank?

  1. Her velocity relative to the bank has two perpendicular components: 4.0 m/s across and 3.0 m/s downstream. They act independently.

  2. Only the across component brings her to the far bank: t=804=20 st = \frac{80}{4} = 20\ \text{s}.

  3. In that time the current carries her 3×20=60 m3 \times 20 = 60\ \text{m} downstream.

  4. Her speed relative to the bank is 42+32=5 m/s\sqrt{4^2 + 3^2} = 5\ \text{m/s}. Check: her path is 802+602=100 m\sqrt{80^2 + 60^2} = 100\ \text{m} long, and 5×20=100 m5 \times 20 = 100\ \text{m}.

Answer

She crosses in 20 s, lands 60 m downstream and moves at 5.0 m/s relative to the bank. Dividing the 100 m path by 4.0 m/s gives 25 s, which wrongly mixes her speed relative to the water with a path measured relative to the bank.

Common traps

  • Leaving speeds in km/h

    A speed in km/h put straight into an equation with gg or with times in seconds gives nonsense, often a number 3.6 or 12.96 times too large. Convert every quantity to SI before you start: divide km/h by 3.6.

  • Converting an area or volume with the plain prefix

    Because 1 cm=10−2 m1\ \text{cm} = 10^{-2}\ \text{m}, it is tempting to write 5 cm2=5×10−2 m25\ \text{cm}^2 = 5 \times 10^{-2}\ \text{m}^2. The prefix is squared with the unit: 5 cm2=5×10−4 m25\ \text{cm}^2 = 5 \times 10^{-4}\ \text{m}^2, and 1 cm3=10−6 m31\ \text{cm}^3 = 10^{-6}\ \text{m}^3.

  • Treating distance as displacement

    After a round trip the displacement is zero, so the average velocity is zero even though the average speed is not. When a question says "velocity" or "displacement", ask where the body ended up relative to where it started.

  • Letting the horizontal motion change the fall

    A ball thrown horizontally does not stay up longer than one dropped from the same height, and a heavier ball does not fall faster. The fall time depends only on the height and on gg; the horizontal speed only sets how far the ball travels in that time.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Distance from rest

Kinematics

A train starts from rest and accelerates uniformly to 30 m/s in 10 s. How far does it travel in that time?

Show the answer

Answer: B. 150 m

Working

The acceleration is a=30−010=3 m/s2a = \frac{30 - 0}{10} = 3\ \text{m/s}^2, so s=12at2=12×3×100=150 ms = \frac{1}{2}at^2 = \frac{1}{2} \times 3 \times 100 = 150\ \text{m}. Second route: the average speed is 0+302=15 m/s\frac{0 + 30}{2} = 15\ \text{m/s}, and 15×10=150 m15 \times 10 = 150\ \text{m}.

Why the other options are wrong

  • A. This is the acceleration, 3010=3 m/s2\frac{30}{10} = 3\ \text{m/s}^2, given as a distance.
  • C. Multiplies the final speed by the time, as if the train ran at 30 m/s throughout; its average speed is only 15 m/s.
  • D. Uses v2=2asv^2 = 2as but leaves out the acceleration: 3022=450\frac{30^2}{2} = 450. Dividing by a=3 m/s2a = 3\ \text{m/s}^2 as well gives the distance.
  • E. Puts 30 into 12at2\frac{1}{2}at^2 as the acceleration; 30 m/s is the final speed, and the acceleration is 3 m/s23\ \text{m/s}^2.

What carries over

Under constant acceleration from rest, the average speed is half the final speed.

Question 2: A stone dropped from a bridge

Kinematics

A stone is dropped from rest from a bridge and hits the water 3.0 s later. Ignoring air resistance and taking g=10 m/s2g = 10\ \text{m/s}^2, how high is the bridge above the water?

Show the answer

Answer: D. 45 m

Working

From rest, h=12gt2=12×10×32=45 mh = \frac{1}{2}gt^2 = \frac{1}{2} \times 10 \times 3^2 = 45\ \text{m}. Second route: the final speed is gt=30 m/sgt = 30\ \text{m/s}, the average speed is 15 m/s, and 15×3=45 m15 \times 3 = 45\ \text{m}.

Why the other options are wrong

  • A. Uses 12gt\frac{1}{2}gt and forgets to square the time.
  • B. This is the stone's speed at impact, gt=30 m/sgt = 30\ \text{m/s}, not the height.
  • C. Uses g=9.8 m/s2g = 9.8\ \text{m/s}^2; the question fixes g=10 m/s2g = 10\ \text{m/s}^2, and that is the value to use.
  • E. Uses gt2gt^2 and drops the factor 12\frac{1}{2}.

What carries over

A body dropped from rest falls 5 m, 20 m and 45 m after 1, 2 and 3 seconds: the distance grows with the square of the time.

Question 3: Rolled off or dropped

Kinematics

Ball P rolls off the edge of a horizontal table top at 4 m/s at the same instant as ball Q is dropped from rest from the same height. Ignoring air resistance, which statement is correct?

Show the answer

Answer: C. They land at the same time.

Working

Vertically both balls start with zero velocity and accelerate at gg through the same height hh, so h=12gt2h = \frac{1}{2}gt^2 gives the same tt for both. P also moves sideways at 4 m/s, so its landing speed is 42+vy2\sqrt{4^2 + v_y^2}, larger than Q's vyv_y.

Why the other options are wrong

  • A. The length of the path does not matter: both balls start with zero vertical velocity and have the same vertical acceleration, so they fall for the same time.
  • B. Horizontal speed has no effect on the vertical motion; the fall time depends only on the height and on gg.
  • D. In free fall the acceleration is gg whatever the mass, so mass does not affect the fall time.
  • E. The times are equal, but P keeps its 4 m/s horizontal velocity as well, so it hits the floor faster than Q.

What carries over

Horizontal and vertical motion are independent: the fall time is set by the vertical motion alone.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

The seven SI base units
Metre (m), kilogram (kg), second (s), ampere (A), kelvin (K), mole (mol) and candela (cd). All other units, such as the newton and the joule, are built from them.
Converting km/h to m/s
Divide by 3.6, because 1 m/s = 3.6 km/h. For example, 72 km/h = 20 m/s.
Converting an area or a volume between cm and m
Square or cube the prefix with the unit: 1 cm2=10−4 m21\ \text{cm}^2 = 10^{-4}\ \text{m}^2 and 1 cm3=10−6 m31\ \text{cm}^3 = 10^{-6}\ \text{m}^3.
The four constant-acceleration equations
v=u+atv = u + at, s=ut+12at2s = ut + \frac{1}{2}at^2, v2=u2+2asv^2 = u^2 + 2as and s=u+v2 ts = \frac{u + v}{2}\,t. Each leaves out one of uu, vv, aa, tt and ss.
What a velocity–time graph shows
Its slope is the acceleration, and the area between the line and the time axis is the displacement.
A projectile's two motions
Horizontally, constant velocity, because no force acts; vertically, free fall with acceleration gg. The time in the air comes from the vertical motion alone.

Key points

  • Convert to SI before you calculate: divide km/h by 3.6, and square or cube a prefix along with its unit.

  • Perpendicular vectors combine by Pythagoras; a vector FF at angle θ\theta has components Fcos⁡θF\cos\theta and Fsin⁡θF\sin\theta.

  • Pick the constant-acceleration equation that leaves out the quantity you neither know nor want.

  • In free fall every body accelerates at gg; a projectile's horizontal velocity stays constant.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.