Lesson 41 of 46 · Physics

Electric charge, fields and circuits

Charge, Coulomb's law, fields and potential, Ohm's law, series and parallel circuits and electrical power, with numbers you can work by hand.

About 22 minutes

In this lesson

  • Use Coulomb's law and the definitions of field, potential difference and energy for charges.
  • Apply Ohm's law and the resistivity formula, and reduce series and parallel networks to find currents and voltages.
  • Calculate electrical power and energy with the form of the power formula that fits the data.

The idea

Electric charge

Charge comes in two kinds, positive and negative: like charges repel and unlike charges attract. It is measured in coulombs (C) and is quantised: every charge is a whole multiple of the elementary charge e=1.6×10−19 Ce = 1.6 \times 10^{-19}\ \text{C}, carried by the proton (positive) and the electron (negative). Charge is conserved. Rubbing a plastic rod with a cloth moves electrons from one to the other; it does not create charge. In conductors, such as metals and ionic solutions, charges move freely; in insulators they do not.

Coulomb's law

Two point charges q1q_1 and q2q_2 a distance rr apart exert forces on each other along the line joining them:

F=kq1q2r2,k=14πε0≈9×109 N m2/C2.F = k\frac{q_1 q_2}{r^2}, \qquad k = \frac{1}{4\pi\varepsilon_0} \approx 9 \times 10^9\ \text{N m}^2/\text{C}^2.

Like gravitation, this is an inverse-square law: double the distance and the force falls to a quarter; double one charge and the force doubles. The two forces form a third-law pair, so they are equal in size even when the charges are not.

Electric field and potential

The electric field at a point is the force per unit positive charge placed there, E=FqE = \frac{F}{q}, in N/C (equivalently V/m). A point charge QQ produces a field of size E=kQr2E = \frac{kQ}{r^2}, pointing away from a positive charge and towards a negative one. Field lines start on positive charges and end on negative ones, and they are closer together where the field is stronger.

The potential difference (voltage) between two points is the work done per unit charge in moving a charge between them, V=WqV = \frac{W}{q}, in volts (J/C). A charge qq moved through a potential difference VV gains or loses energy qVqV. An electron accelerated through 1 V gains one electronvolt: 1 eV=1.6×10−19 J1\ \text{eV} = 1.6 \times 10^{-19}\ \text{J}.

Between two parallel plates a distance dd apart with a potential difference VV, the field is uniform: E=VdE = \frac{V}{d}. Such plates form a capacitor, which stores charge Q=CVQ = CV, where CC is its capacitance in farads; the energy stored is 12CV2\frac{1}{2}CV^2.

Current, resistance and Ohm's law

Current is the rate of flow of charge, I=QtI = \frac{Q}{t}, in amperes (1 A=1 C/s1\ \text{A} = 1\ \text{C/s}). By convention, current flows from the positive terminal round the circuit to the negative one; the electrons in a metal move the other way.

The resistance of a component is R=VIR = \frac{V}{I}, in ohms (Ω\Omega). Ohm's law says that for a metal at constant temperature RR is constant, so V=IRV = IR and the current is proportional to the voltage. The resistance of a wire depends on its material and its shape:

R=ρLAR = \rho\frac{L}{A}

where ρ\rho is the resistivity of the material, LL the length and AA the cross-sectional area. Longer wires resist more; thicker wires resist less.

Series and parallel

Series Parallel
Current the same through each splits; the branch currents add up to the total
Voltage splits; the parts add up to the total the same across each
Total resistance R=R1+R2+…R = R_1 + R_2 + \dots 1R=1R1+1R2+…\frac{1}{R} = \frac{1}{R_1} + \frac{1}{R_2} + \dots

Two resistors in parallel have a combined resistance of R1R2R1+R2\frac{R_1R_2}{R_1 + R_2}; two equal ones give half the resistance of one. A parallel combination always has less resistance than its smallest branch, because each new branch gives the current another path.

These rules come from Kirchhoff's laws. The current flowing into a junction equals the current flowing out, because charge is conserved. Round any closed loop the potential differences add up to zero, because energy is conserved.

Electrical power and energy

The power delivered to a component is

P=VI=I2R=V2R.P = VI = I^2R = \frac{V^2}{R}.

Choose the form that uses what you know. At a fixed voltage, such as the mains, a smaller resistance draws a larger current and more power. The energy transferred is E=PtE = Pt. Electricity bills count kilowatt-hours: 1 kWh=1000 W×3600 s=3.6×106 J1\ \text{kWh} = 1000\ \text{W} \times 3600\ \text{s} = 3.6 \times 10^6\ \text{J}.

Solving circuit questions

Reduce the circuit step by step: combine each parallel group, then the series parts, to find the total resistance. Use I=VRI = \frac{V}{R} for the current from the supply. Then work back outwards, finding the voltage across each part and the current in each branch. Finally check that the branch currents add up to the total and that the voltages round each loop add up to the supply voltage.

Worked examples

Example 1: The force between two charged spheres

Two small spheres carry charges of +2.0 μC+2.0\ \mu\text{C} and +3.0 μC+3.0\ \mu\text{C}, and their centres are 30 cm apart. Taking k=9×109 N m2/C2k = 9 \times 10^9\ \text{N m}^2/\text{C}^2, find the force between them. What is the force if the distance is halved?

  1. Convert to SI: q1=2.0×10−6 Cq_1 = 2.0 \times 10^{-6}\ \text{C}, q2=3.0×10−6 Cq_2 = 3.0 \times 10^{-6}\ \text{C}, r=0.30 mr = 0.30\ \text{m}.

  2. Substitute: F=9×109×2.0×10−6×3.0×10−60.302=9×109×6×10−120.09F = \frac{9 \times 10^9 \times 2.0 \times 10^{-6} \times 3.0 \times 10^{-6}}{0.30^2} = \frac{9 \times 10^9 \times 6 \times 10^{-12}}{0.09}.

  3. Work the powers of ten: 9×109×6×10−12=54×10−3=0.0549 \times 10^9 \times 6 \times 10^{-12} = 54 \times 10^{-3} = 0.054, and 0.0540.09=0.60 N\frac{0.054}{0.09} = 0.60\ \text{N}. Second route: 9×1090.09=1011\frac{9 \times 10^9}{0.09} = 10^{11}, and 1011×6×10−12=0.60 N10^{11} \times 6 \times 10^{-12} = 0.60\ \text{N}. Both charges are positive, so the force is repulsive.

  4. Halving the distance multiplies the force by 22=42^2 = 4: 4×0.60=2.4 N4 \times 0.60 = 2.4\ \text{N}.

Answer

The spheres repel each other with 0.60 N, and with 2.4 N at 15 cm. Doubling the force to 1.2 N when the distance is halved is the tempting wrong answer: the law is inverse-square.

Example 2: A series and parallel circuit

A 12 V battery of negligible internal resistance is connected to a 2.0 Ω2.0\ \Omega resistor in series with a parallel pair of 6.0 Ω6.0\ \Omega and 3.0 Ω3.0\ \Omega resistors. Find the current from the battery, the current in each resistor of the pair, and the total power.

  1. The parallel pair: 6×36+3=2.0 Ω\frac{6 \times 3}{6 + 3} = 2.0\ \Omega.

  2. Total resistance 2+2=4.0 Ω2 + 2 = 4.0\ \Omega, so the battery current is I=124=3.0 AI = \frac{12}{4} = 3.0\ \text{A}.

  3. The series resistor takes 3×2=6 V3 \times 2 = 6\ \text{V}, leaving 6 V across the pair. Currents: 66=1.0 A\frac{6}{6} = 1.0\ \text{A} and 63=2.0 A\frac{6}{3} = 2.0\ \text{A}, which add up to 3.0 A as they should.

  4. Total power: P=VI=12×3=36 WP = VI = 12 \times 3 = 36\ \text{W}. Check part by part: 32×2=18 W3^2 \times 2 = 18\ \text{W}, 626=6 W\frac{6^2}{6} = 6\ \text{W} and 623=12 W\frac{6^2}{3} = 12\ \text{W}, total 36 W.

Answer

The battery supplies 3.0 A; 1.0 A flows through the 6.0 Ω6.0\ \Omega resistor and 2.0 A through the 3.0 Ω3.0\ \Omega one; the circuit uses 36 W. The larger current takes the branch with the smaller resistance.

Example 3: Stretching a wire

A wire has a resistance of 10 Ω10\ \Omega. It is drawn out to twice its length, its volume staying the same. What is its new resistance?

  1. The volume LALA is fixed, so doubling the length LL halves the cross-sectional area AA.

  2. In R=ρLAR = \rho\frac{L}{A}, the numerator doubles and the denominator halves, so RR is multiplied by 2×2=42 \times 2 = 4.

  3. New resistance: 4×10=40 Ω4 \times 10 = 40\ \Omega.

Answer

The stretched wire has a resistance of 40 Ω40\ \Omega. Answering 20 Ω20\ \Omega allows for the extra length but forgets that the wire has also become thinner.

Common traps

  • Halving instead of quartering

    In Coulomb's law the distance is squared. Doubling the separation divides the force by 4, and tripling it divides the force by 9. Write the factor for each quantity separately, then combine them.

  • Adding resistances in parallel

    Two 6 Ω6\ \Omega resistors in parallel make 3 Ω3\ \Omega, not 12 Ω12\ \Omega. If your total for a parallel group is larger than its smallest branch, you have added the resistances instead of their reciprocals.

  • Thinking current is used up

    The same current flows out of a resistor as flows into it; charge is conserved. What the resistor takes is energy, which is why the potential falls across it. Every component in a single series loop carries the same current.

  • Picking a power formula that hides a change

    P=I2RP = I^2R suggests that more resistance means more power, while P=V2RP = \frac{V^2}{R} suggests the opposite. Both are right; use the one whose other quantity is fixed. For components in parallel the voltage is fixed, so the one with the smaller resistance dissipates more power.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Changing charges and distance

Electrostatics

Two point charges exert a force of size FF on each other. Both charges are doubled and their separation is tripled. What is the new force?

Show the answer

Answer: B. 49F\frac{4}{9}F

Working

The product of the charges is multiplied by 2×2=42 \times 2 = 4, and r2r^2 by 32=93^2 = 9. So F′=49FF' = \frac{4}{9}F.

Why the other options are wrong

  • A. Doubles only one charge; both are doubled, which multiplies their product by 4.
  • C. Divides by the distance factor rather than its square; Coulomb's law is an inverse-square law.
  • D. Inverts the factor; increasing the separation must reduce the force.
  • E. Multiplies by the square of the distance factor instead of dividing by it.

What carries over

In an inverse-square law, multiplying the distance by kk divides the force by k2k^2.

Question 2: Voltage across a parallel pair

Circuits

Three identical 6.0 Ω6.0\ \Omega resistors are connected so that two are in parallel and this pair is in series with the third. The combination is connected to a 9.0 V supply of negligible internal resistance. What is the voltage across the parallel pair?

Show the answer

Answer: D. 3.0 V

Working

The pair has 62=3.0 Ω\frac{6}{2} = 3.0\ \Omega, so the total is 3+6=9.0 Ω3 + 6 = 9.0\ \Omega and the current is 99=1.0 A\frac{9}{9} = 1.0\ \text{A}. Across the pair: 1.0×3.0=3.0 V1.0 \times 3.0 = 3.0\ \text{V}. Check: the series resistor takes 6.0 V, and 6+3=9 V6 + 3 = 9\ \text{V}. Second route: the voltage divides in proportion to resistance, 33+6×9=3.0 V\frac{3}{3 + 6} \times 9 = 3.0\ \text{V}.

Why the other options are wrong

  • A. This is the whole supply voltage; it ignores the series resistor, which takes its own share.
  • B. This is the voltage across the single series resistor, not across the pair.
  • C. Splits the voltage equally, as if the pair had the same resistance as the single resistor; the pair has only 3.0 Ω3.0\ \Omega.
  • E. Divides the supply voltage by 6 Ω6\ \Omega, which gives a current in amperes, and reads it as a voltage.

What carries over

In series, the supply voltage divides in proportion to the resistances.

Question 3: Energy used by a heater

Circuits

A heater draws a current of 5.0 A from a 200 V supply for 30 minutes. How much energy does it transfer?

Show the answer

Answer: D. 1.8×106 J1.8 \times 10^6\ \text{J}

Working

The power is P=VI=200×5.0=1000 WP = VI = 200 \times 5.0 = 1000\ \text{W} and the time is 30×60=1800 s30 \times 60 = 1800\ \text{s}, so E=1000×1800=1.8×106 JE = 1000 \times 1800 = 1.8 \times 10^6\ \text{J}. Second route: 1 kW for 0.5 h is 0.5 kWh, and 0.5×3.6×106=1.8×106 J0.5 \times 3.6 \times 10^6 = 1.8 \times 10^6\ \text{J}.

Why the other options are wrong

  • A. This is the power in watts, the energy per second, not the energy transferred in 30 minutes.
  • B. Uses 30 s instead of 30 minutes, which is 1800 s.
  • C. Takes the power as VI=40 W\frac{V}{I} = 40\ \text{W}; that ratio is the resistance, and the power is VIVI.
  • E. Uses one hour instead of half an hour; that is 1 kWh, but the heater ran for 0.5 h.

What carries over

Energy is power multiplied by time: time in seconds gives joules, time in hours with power in kilowatts gives kilowatt-hours.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

The elementary charge
e=1.6×10−19 Ce = 1.6 \times 10^{-19}\ \text{C}; every charge is a whole multiple of it.
Coulomb's law
F=kq1q2r2F = k\frac{q_1 q_2}{r^2} with k≈9×109 N m2/C2k \approx 9 \times 10^9\ \text{N m}^2/\text{C}^2; doubling the distance quarters the force.
Field between parallel plates
Uniform, with E=VdE = \frac{V}{d}, in V/m.
Ohm's law and resistivity
V=IRV = IR; a wire of length LL and cross-section AA has R=ρLAR = \rho\frac{L}{A}.
Resistors in series and in parallel
Series: R=R1+R2R = R_1 + R_2, with the same current through each. Parallel: 1R=1R1+1R2\frac{1}{R} = \frac{1}{R_1} + \frac{1}{R_2}, with the same voltage across each.
The three forms of electrical power
P=VI=I2R=V2RP = VI = I^2R = \frac{V^2}{R}, in watts.

Key points

  • Coulomb's law is inverse-square: F=kq1q2r2F = k\frac{q_1q_2}{r^2}, with k≈9×109 N m2/C2k \approx 9 \times 10^9\ \text{N m}^2/\text{C}^2.

  • Moving a charge qq through a potential difference VV transfers energy qVqV.

  • Series resistances add; a parallel combination has less resistance than its smallest branch.

  • Electrical power is VI=I2R=V2RVI = I^2R = \frac{V^2}{R}, and energy is power multiplied by time.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.