Lesson 31 of 46 · Chemistry

Reaction rates and chemical equilibrium

Explain what speeds a reaction up, read rate laws from data, write equilibrium constants and predict shifts with Le Chatelier's principle.

About 22 minutes

In this lesson

  • Explain the effect of concentration, temperature, surface area and catalysts with collision theory.
  • Find reaction orders from experimental data and use a rate law to predict a new rate.
  • Write an equilibrium constant, compare it with the reaction quotient and predict the direction of change.
  • Predict how changes in concentration, pressure, temperature and catalysts affect an equilibrium and its constant.

The idea

Rate: how fast concentrations change

The rate of a reaction is the change in concentration of a reactant or product per unit time, usually in mol/(L s). It is highest at the start and falls as reactants are used up. Kinetics asks how fast a reaction goes; equilibrium, later in this lesson, asks how far. Keep the two questions apart: a reaction can lie far towards products and still be very slow.

Collision theory and activation energy

Reacting particles must collide, with enough energy and in a suitable orientation. The minimum energy is the activation energy EaE_a, the height of the barrier between reactants and products on an energy profile. Each factor that changes a rate does so through these collisions:

Change Why the rate rises
higher concentration (or gas pressure) more collisions per second
larger surface area of a solid more particles exposed to collisions
higher temperature a much larger fraction of collisions has at least EaE_a; collisions also become more frequent, a smaller effect
catalyst an alternative pathway with a lower EaE_a

A catalyst is not used up. On the energy profile it lowers the peak but leaves the energies of reactants and products, and so ΔH\Delta H, unchanged. Because it lowers the barrier for the reverse reaction by the same amount, it speeds up both directions by the same factor. Enzymes are biological catalysts.

Rate laws come from experiment

For a reaction between A\mathrm{A} and B\mathrm{B} the rate law has the form

rate=k [A]m [B]n\text{rate} = k\,[\mathrm{A}]^m\,[\mathrm{B}]^n

The exponents mm and nn are the orders with respect to each reactant, and they are found by experiment. In general they are not the coefficients of the balanced equation; they match them only for a single elementary step. To read an order from data, compare two experiments in which only one concentration changes:

  • rate unchanged when the concentration doubles: zero order;
  • rate doubles: first order;
  • rate quadruples: second order.

The rate constant kk does not depend on concentration; it changes with temperature and with a catalyst.

Dynamic equilibrium

In a closed system a reversible reaction slows in the forward direction as reactants are used up, while the reverse reaction speeds up as products build up. When the two rates become equal, the concentrations stop changing. This is dynamic equilibrium: both reactions continue, and the concentrations are constant, not equal.

The equilibrium constant

For aA+bB⇌cC+dDa\mathrm{A} + b\mathrm{B} \rightleftharpoons c\mathrm{C} + d\mathrm{D},

Kc=[C]c [D]d[A]a [B]bK_c = \frac{[\mathrm{C}]^c\,[\mathrm{D}]^d}{[\mathrm{A}]^a\,[\mathrm{B}]^b}

with equilibrium concentrations, products on top and each raised to its coefficient. Pure solids and pure liquids, including water as the solvent, are left out. A large KK means the mixture at equilibrium is mostly products; a small KK means mostly reactants. The constant for the reverse reaction is 1K\frac{1}{K}. Only temperature changes KK.

The reaction quotient QQ has the same expression but uses the concentrations at any moment. Comparing it with KK tells you which way a mixture will move:

  • Q<KQ < K: too few products, the reaction proceeds forward;
  • Q>KQ > K: too many products, it proceeds in reverse;
  • Q=KQ = K: the mixture is at equilibrium.

Le Chatelier's principle

When an equilibrium is disturbed, the position shifts in the direction that partly undoes the disturbance.

Disturbance Shift Does KK change?
add a reactant or remove a product forward no
compress a gas mixture (raise pressure) towards fewer moles of gas no
raise the temperature in the endothermic direction yes
add a catalyst none; equilibrium is reached sooner no

If both sides have the same number of moles of gas, pressure has no effect on the position. For temperature, treat heat as a reactant of the endothermic direction: if the forward reaction is exothermic, heating shifts it backwards and KK falls; cooling raises KK.

Fast is not the same as far

An industrial or biological process often needs both a good rate and a good yield, and the two can pull against each other. For an exothermic reaction a low temperature gives a larger KK, but the reaction then runs slowly; a catalyst lets it run at a useful speed without spoiling the yield. When a question mixes the two ideas, sort each statement into "how fast" (rate, EaE_a, catalyst, kk) or "how far" (KK, position, yield) before judging it.

Worked examples

Example 1: Reading a rate law from three experiments

For the reaction of A\mathrm{A} with B\mathrm{B} at a fixed temperature:

Experiment [A][\mathrm{A}] (mol/L) [B][\mathrm{B}] (mol/L) Initial rate (mol/(L s))
1 0.100.10 0.100.10 2.0×10−32.0 \times 10^{-3}
2 0.200.20 0.100.10 4.0×10−34.0 \times 10^{-3}
3 0.100.10 0.200.20 8.0×10−38.0 \times 10^{-3}

Find the rate law, the rate constant, and the rate when both concentrations are 0.20 mol/L0.20\ \text{mol/L}.

  1. Experiments 1 and 2: only [A][\mathrm{A}] doubles, and the rate doubles. The reaction is first order in A\mathrm{A}.

  2. Experiments 1 and 3: only [B][\mathrm{B}] doubles, and the rate goes up four times. It is second order in B\mathrm{B}, so rate=k[A][B]2\text{rate} = k[\mathrm{A}][\mathrm{B}]^2.

  3. From experiment 1: 2.0×10−3=k×0.10×0.010=k×1.0×10−32.0 \times 10^{-3} = k \times 0.10 \times 0.010 = k \times 1.0 \times 10^{-3}, so k=2.0 L2 mol−2 s−1k = 2.0\ \text{L}^2\,\text{mol}^{-2}\,\text{s}^{-1}.

  4. With both at 0.200.20: compared with experiment 1, [A][\mathrm{A}] doubles (×2\times 2) and [B][\mathrm{B}] doubles (×4\times 4), so the rate is 8×2.0×10−3=1.6×10−2 mol/(L s)8 \times 2.0 \times 10^{-3} = 1.6 \times 10^{-2}\ \text{mol/(L s)}. Check: 2.0×0.20×0.040=0.0162.0 \times 0.20 \times 0.040 = 0.016.

Answer

rate=k[A][B]2\text{rate} = k[\mathrm{A}][\mathrm{B}]^2 with k=2.0 L2 mol−2 s−1k = 2.0\ \text{L}^2\,\text{mol}^{-2}\,\text{s}^{-1}; the new rate is 1.6×10−2 mol/(L s)1.6 \times 10^{-2}\ \text{mol/(L s)}. Taking the orders from equation coefficients instead of from the data is the usual error.

Example 2: Calculating K, then predicting the direction

For H2(g)+I2(g)⇌2HI(g)\mathrm{H_2(g) + I_2(g) \rightleftharpoons 2HI(g)} at a certain temperature, an equilibrium mixture contains [H2]=0.10[\mathrm{H_2}] = 0.10, [I2]=0.20[\mathrm{I_2}] = 0.20 and [HI]=0.40 mol/L[\mathrm{HI}] = 0.40\ \text{mol/L}. Find KcK_c. Then, at the same temperature, a mixture has all three concentrations equal to 0.20 mol/L0.20\ \text{mol/L}. Which way does it react?

  1. Write the expression with the coefficient 2 as a power: Kc=[HI]2[H2][I2]K_c = \frac{[\mathrm{HI}]^2}{[\mathrm{H_2}][\mathrm{I_2}]}.

  2. Substitute: Kc=0.4020.10×0.20=0.160.020=8.0K_c = \frac{0.40^2}{0.10 \times 0.20} = \frac{0.16}{0.020} = 8.0.

  3. For the second mixture, Q=0.2020.20×0.20=1.0Q = \frac{0.20^2}{0.20 \times 0.20} = 1.0.

  4. Q=1.0Q = 1.0 is smaller than K=8.0K = 8.0: there are too few products, so the reaction proceeds forward, forming more HI\mathrm{HI}.

Answer

Kc=8.0K_c = 8.0, and the second mixture reacts forward until QQ reaches 8.08.0. Forgetting the square gives 0.400.020=20\frac{0.40}{0.020} = 20, a wrong constant.

Example 3: Four changes to one equilibrium

In 2SO2(g)+O2(g)⇌2SO3(g)\mathrm{2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g)} the forward reaction is exothermic. Predict the effect on the amount of SO3\mathrm{SO_3} at equilibrium of: raising the pressure; raising the temperature; adding a catalyst; removing SO3\mathrm{SO_3} as it forms.

  1. Pressure: the left has 33 moles of gas, the right 22. Compressing favours fewer moles, so the position shifts right and more SO3\mathrm{SO_3} forms. KK is unchanged.

  2. Temperature: the reverse reaction is endothermic, so heating shifts the position left; less SO3\mathrm{SO_3}, and KK decreases.

  3. Catalyst: both directions speed up by the same factor, so equilibrium is reached sooner but its composition does not change.

  4. Removing a product makes Q<KQ < K, so the reaction runs forward to replace it; more SO3\mathrm{SO_3} is made overall.

Answer

More SO3\mathrm{SO_3} with higher pressure or with removal of product; less with higher temperature; no change with a catalyst. "A catalyst increases the yield" is the tempting wrong statement.

Common traps

  • Taking orders from the balanced equation

    The coefficients in 2A+B→C\mathrm{2A + B \rightarrow C} do not tell you that the rate law is k[A]2[B]k[\mathrm{A}]^2[\mathrm{B}]. Orders come from data. Use coefficients as exponents only in an equilibrium constant, or when a question says the reaction is a single elementary step.

  • Believing a catalyst shifts an equilibrium

    A catalyst changes how fast equilibrium is reached, not where it lies. It does not change KK, ΔH\Delta H or the yield at equilibrium. Options that promise "more product" from a catalyst are wrong.

  • Thinking concentration or pressure changes K

    Adding a reactant or compressing a gas shifts the position, and the concentrations rearrange until QQ equals the same KK. Only a change of temperature gives a new value of KK.

  • Confusing equal rates with equal concentrations

    At equilibrium the forward and reverse rates are equal. The concentrations are constant, but they are usually very different from one another; KK says by how much.

Check yourself

Choose an answer to each question: you will see at once whether it is right, and why.

Question 1: Changing two concentrations at once

Reaction kinetics

A reaction has the rate law rate=k[X]2[Y]\text{rate} = k[\mathrm{X}]^2[\mathrm{Y}]. At constant temperature, [X][\mathrm{X}] is halved and [Y][\mathrm{Y}] is doubled. By what factor does the rate change?

Show the answer

Answer: B. 12\frac{1}{2}

Working

The new rate is k(12[X])2(2[Y])=14×2×k[X]2[Y]k\left(\frac{1}{2}[\mathrm{X}]\right)^2(2[\mathrm{Y}]) = \frac{1}{4} \times 2 \times k[\mathrm{X}]^2[\mathrm{Y}], so the rate is multiplied by 12\frac{1}{2}.

Why the other options are wrong

  • A. Accounts for halving [X][\mathrm{X}] but forgets that doubling [Y][\mathrm{Y}] doubles the rate.
  • C. Treats both reactants as first order, so the halving and the doubling cancel; X\mathrm{X} is second order.
  • D. Swaps the orders: 12\frac{1}{2} for X\mathrm{X} and 222^2 for Y\mathrm{Y}.
  • E. Treats [X][\mathrm{X}] as doubled rather than halved: 22×22^2 \times 2.

What carries over

Raise each concentration factor to its own order, then multiply the factors together.

Question 2: What changes the equilibrium constant?

Chemical equilibrium

For N2(g)+3H2(g)⇌2NH3(g)\mathrm{N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g)} the forward reaction is exothermic. Which change increases the value of KcK_c?

Show the answer

Answer: C. Lowering the temperature

Working

Only temperature changes KK. The forward reaction releases heat, so cooling favours it: the position moves towards NH3\mathrm{NH_3} and KcK_c increases. The other changes move the position or the speed but leave KcK_c as it was.

Why the other options are wrong

  • A. This shifts the position towards NH3\mathrm{NH_3} (fewer moles of gas), but KK itself does not change with pressure.
  • B. A catalyst speeds up both directions equally; it changes neither the position nor KK.
  • D. This shifts the position forward, but the concentrations rearrange to fit the same KK.
  • E. Removing a product drives the reaction forward without changing KK; only temperature does that.

What carries over

Concentration and pressure move the position of equilibrium; only temperature moves the constant.

Question 3: What a catalyst does

Reaction kinetics

A catalyst is added to a reversible reaction that has already reached equilibrium. Which statement is correct?

Show the answer

Answer: D. The forward and reverse reactions speed up by the same factor.

Working

A catalyst offers a pathway with a lower activation energy, and the barrier falls by the same amount in both directions, so both rates rise by the same factor. Since they stay equal, the system stays at equilibrium with the same composition, the same KK and the same ΔH\Delta H.

Why the other options are wrong

  • A. A catalyst does not shift the position of equilibrium, so the yield is unchanged.
  • B. The catalysed pathway is shared by both directions, so the reverse barrier falls by the same amount.
  • C. ΔH\Delta H depends only on the energies of reactants and products, which a catalyst does not change.
  • E. KK changes only with temperature; a catalyst leaves it unchanged.

What carries over

A catalyst changes only how fast equilibrium is reached, never where it lies.

Flashcards

Recall the answer before you flip each card, then say whether you knew it. Cards you miss come back at the end.

Activation energy
The minimum energy a collision must have for the particles to react: the height of the barrier on an energy profile.
What a catalyst changes
It provides a pathway with a lower EaE_a and speeds up both directions by the same factor. It does not change ΔH\Delta H, KK or the yield at equilibrium.
Reading an order from data
Double one concentration only: rate unchanged means zero order, doubled means first order, quadrupled means second order.
Writing KcK_c
Equilibrium concentrations of products over reactants, each raised to its coefficient; leave out pure solids and liquids.
Q compared with K
Q<KQ < K: the reaction goes forward. Q>KQ > K: it goes in reverse. Q=KQ = K: it is at equilibrium.
The only change that alters K
Temperature. Heating favours the endothermic direction; if the forward reaction is exothermic, K falls.

Key points

  • Rates rise with concentration, surface area, temperature and catalysts, because collisions with at least the activation energy become more frequent.

  • Reaction orders come from experimental data, not from the coefficients of the balanced equation.

  • KcK_c is products over reactants, each to the power of its coefficient; compare QQ with KK to find the direction of change.

  • Le Chatelier: concentration and pressure shift the position; only temperature changes K; a catalyst changes neither.

All questions here are original and written for UniExamer; none comes from the test maker.

Written and reviewed by the UniExamer education and assessment team. Every worked example and check question was checked before publication. If you find a mistake, write to support@uniexamer.com.

Practise this topic

Fresh questions on this skill, with worked explanations. Practice needs a Single Exam Pass or Plus.